[Notification of CAD Data Download Issue]
We regret to inform you that we are currently experiencing issues with downloading CAD data for some products.
We are investigating the cause of this problem. We apologize for any inconvenience this may cause and appreciate your understanding.
With regards to the connected use of HG-S and HG-T
Conditions of connected use of HG-S and HG-T
- When using HG-TC□ contollers of Thru-beam Type Digital Displacement Sensor HG-T series and HG-SC□ controllers of Contact-Type Digital Displacement Sensor HG-S series connected together, please be sure to use new controllers HG-SC□ and HG-TC□ which are manufactured in or after February, 2019.
|
- Up to 15 slave units (14 slave units when connecting with communication unit) can be connected to 1 master unit.
When using HG-TC□ contollers of HG-T series and HG-SC□ controllers of HG-S series connected together,
- Please connect the slave units of the same series to the near side of the main unit and the slave units of the different series to the far side.
- Calculation, simultaneous input, and copy functions can be used to the slave units of same series as the master unit only.
- External output (LOCIG2) and connected units count check functions can be used.
|
