Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Programmable Controllers / Interface Terminal > Programmable Controllers / Interface Terminal > Programmable Controller FP-X0

Programmable Controller FP-X0

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Basic Information

New Multi-functional & Economical PLC

CE , UKCA Approved
CE : Excluding some models
UKCA : Excluding some models

Features

Plenty of I/O points -150 points max. [L40□ / L60□]

If the customer can not predict the number of I/O points needed by his machineries and devices in the future, he will feel hesitant and uncomfortable. But, the I/O number of FP-X0 can reach 150 points max. by using the FP-X expansion unit. Therefore, the customer's discomfort and hesitation can be eliminated.
(L14R and L30R don't have the expansion function, so they can not be expanded.)

• The maximum number of expansion unit is up to 3 units.

The cable between the units can be bent to realize
the side-by-side installation, thus saving the installation space.

Further expansion and more functions achieved by using the existing FP0R expansion unit easily [L40□ / L60□]

The maximum number of FP0R expansion unit is up to 3 after the control units are equipped with adapters.
A wider range of application can be achieved by using [transistor output], [analog I/O], [thermocouple input] and [I/O LINK (network)].
Only one FP0 expansion adapter can be installed on the control unit.
In addition, two FP-X expansion units can be installed after the adapter is installed.
(L14R and L30R don't have the expansion function, so they can not be expanded.)

Besides the supplied expansion cable of 8 cm 3.150 in, 30 cm 11.811 in and 80 cm 31.496 in types are also sold separately.
They can be bent or straightened. (The total extension length is within 160 cm 62.992 in.)

Both of them are 90 mm 3.543 in
and can be installed in the cabinet.

Super-high processing speed

Super-high speed of 80 ns/step for 0 to 3,000 steps (ST command). 580 ns/step processing speed for 3,001 steps or more (Only for L40□ and L60□).

Body equipped with combined relay and transistor output

Pulse output function / High-speed counter function

The pulse output function of FP-X0 (1-axis for L14R and 2-axis for L30R / L40□ / L60□) is built in the body of the control unit.
Compared with the previous PLC that must use the advanced or specific positioning units or more than two multi-axis control devices, FP-X0 only uses one unit basically, thus saving the space and reducing the cost.

Built-in 4-point high-speed counter

4-point for 1-phase or 2-point for 2-phase (X0 to X3)

Adopting 2-axis linear interpolation [L40□ / L60□]

2-axis linear interpolation is a kind of function that controls 2 motor axes and makes the robot arm and tool head carry out diagonal line moving simultaneously, which is applied in the stacker’s picking & mounting components, the control of XY workbench and the baseplate cutting etc.