Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Static Control Devices > Static Control Devices > Pulse AC Method Area Ionizer ER-X > Part Number > ER-X064HC

ER-X064HC | Pulse AC Method Area Ionizer ER-X

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Dimensions
Accessories (Option)

Product Number	ER-X064HC
Part Number	ER-X064HC
Product	Pulse AC Method Area Ionizer
Details	Head (High and low temperature resistant type)
Product name	Pulse AC Method Area Ionizer ER-X

As of April 19, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item	Specifications
Product Number	ER-X064HC
Part Number	ER-X064HC
Applicable regulations	CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada)
Effective charge removal width	640 mm 25.197 in approx.
Charge removal time	1 sec. or less (Note： Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
Ion balance	±30 V or less (Note 1：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2： Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.)
Discharge method	Pulse AC method
Discharge frequency	30 Hz (Note：Set the discharge frequency to 30 Hz. Do not use any other frequency.)
Discharge output voltage	±7,000 V approx.
Ozone generation	0.01 ppm or less (Note：Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.)
Maximum air pressure	0.1 MPa
Applicable fluid	Air (dried clean air) (Note：The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).)
Operating altitude	2,000 m 6561.68 ft or less (Note：Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.)
Ambient temperature	Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance.
Ambient humidity	35 to 65 % RH, Storage : 35 to 85 % RH
Vibration resistance	10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance	100 m/s² acceleration (10 G approx.), in X, Y and Z directions three times each
Enclosure earthing	Floating
Material	Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS
Length of high-voltage cable	Heat-resistant shielded cable, 1.8 m 5.906 ft
Weight	Net weight : 900 g approx.
Accessories	ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory)