Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Measurement Sensors
> Measurement Sensors
> Contact-Type Digital Displacement Sensor HG-S
> Part Number
> HG-SC101-P
HG-SC101-P | Contact-Type Digital Displacement Sensor HG-S
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | HG-SC101-P |
| Part Number | HG-SC101-P |
| Product | Contact-Type Digital Displacement Sensor |
| Details | Master unit High-performance type |
| Product name | Contact-Type Digital Displacement Sensor HG-S |
As of April 20, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | HG-SC101-P |
| Part Number | HG-SC101-P |
| Regulatory compliance | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Pollution degree | 2 |
| Operating altitude | 2000 m 6561.68 ft or less |
| Environmental resistance : Protection | IP40 (IEC) |
| Environmental resistance : Ambient temperature | -10 to +50 ℃ +14 to +122 ℉ (No condensation or icing), Storage: -20 to +60 ℃ -4 to +140 ℉ |
| Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Environmental resistance : Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 to 58Hz), maximum acceleration 49 m/s2 (58 to 150 Hz) in X, Y and Z directions for two hours each |
| Environmental resistance : Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| Material | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| Weight | Net weight: 140 g approx. |
| Remark | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 ℉. |
| External inputs (Input 1, Input 2, Input 3):Trigger input | Input time 2 ms or more (ON) |
Controller
| Item | Specifications |
|---|---|
| Compatible sensor head | HG-S1010-AC,HG-S1110-AC,HG-S1010(R),HG-S1110(R),HG-S1032,HG-S1050 |
| Number of connectable units | Up to 15 slave units can be connected per master unit. (Note):When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
Controllers
| Item | Specifications |
|---|---|
| Supply voltage | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| Current consumption | 70 mA or less (when sensor head is connected)(Note):Current consumption does not include analog current output. |
Controller
| Item | Specifications |
|---|---|
| Analog current output | • Current output range：4 to 20 mA/F.S.(default value) • Error output：0 mA • Linearity：±0.25% F.S. • Load impedance：250Ω max. |
| Control outputs(Output 1, Output 2, Output 3) | <NPN output type> NPN open-collector transistor • Maximum sink current: 50 mA(Note 5)) • Applied voltage: 30 V DC or less(between output and 0 V) • Residual voltage: 1.5 V or less(at 50 mA sink current) • Leakage current: 0.1 mA or less <PNP output type>> PNP open-collector transistor • Maximum source current: 50 mA(Note 5) • Applied voltage: 30 V DC or less(between output and +V) • Residual voltage: 1.5 V or less(at 50 mA source current) • Leakage current: 0.1 mA or less |
| Control outputs(Output 1, Output 2, Output 3):Short-circuit protection | Incorporated (automatic reset type) |
| Control outputs(Output 1, Output 2, Output 3):Judgment output | NO / NC switching method |
| Control outputs(Output 1, Output 2, Output 3):Alarm output | Open when alarm occurs |
| External inputs (Input 1, Input 2, Input 3) | <NPN output type> Non-contact input or NPN open-collector transistor • Input condition: Invalid (+8 V to +V DC or open) Valid (0 to +1.2 V DC) •Input impedance: 10 kΩ approx. <PNP output type> Non-contact input or PNP open-collector transistor • Input condition: Invalid (0 to +0.6 V DC or open) Valid (+4 V to +V DC) • Input impedance: 10 kΩ approx. |
| External inputs (Input 1, Input 2, Input 3):Preset input | Input time 20 ms or more (ON) |
| External inputs (Input 1, Input 2, Input 3):Reset input | Input time 20 ms or more (ON) |
| External inputs (Input 1, Input 2, Input 3) Bank input A / B | Input time 20 ms or more (ON)(Note):Banks 1 to 3 can be selected by switching bank input A / B. |
| Response time | 3 ms, 5 ms, 10 ms, 100 ms, 500 ms, 1,000 ms switching type |
| Digital display | 204-segment LCD |
| Display resolution | 0.1μm 0.004 mil |
| Display range | -199.9999 to 199.9999mm -7.874 to 7.874 in |
| Contamination level | 2 |
| Elevation | 2,000 m 6561.68 ft or less (Note):Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Environmental resistance:Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Cable | 0.2 mm2 2-core cable (brown and blue lead wires) / 0.15 mm2 7‑core composite cable, 2 m 6.562 ft long |
| Notes | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20℃ +68℉. |
Accessories (Option)
|
| Product Number | CN-HS-C20 |
| Part Number | CN-HS-C20 |
| Product name | Mating cable |
|
|
| Product Number | CN-HS-C20L |
| Part Number | CN-HS-C20L |
| Product name | Mating cable |
|
|
| Product Number | CN-HS-C3 |
| Part Number | CN-HS-C3 |
| Product name | Mating cable |
Applicable Products
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT US
BY EMAIL
BY EMAIL
Please click your area to select country or region
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
