Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Wire-Saving Systems
> Picking Switch for Shutter SL-VPK02
> Part Number
> SL-VPK02
SL-VPK02 | Picking Switch for Shutter SL-VPK02
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
- To Be Discontinued
September 30, 2025
| Product Number | SL-VPK02 |
| Part Number | SL-VPK02 |
| Product | Picking switch |
| Product name | Picking Switch for Shutter SL-VPK02 |
-
-
-
-
Sorry, no suggested alternative products.
As of April 25, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | SL-VPK02 |
| Part Number | SL-VPK02 |
| Supply voltage | 24 V DC ± 10 % (Supplied from a S-LINK V control unit. A separate power supply is also available.) |
| Current consumption | 24 V DC line: 25 mA or less (When the lamp is ON) Current for shutter operation: 450 mA or less |
| Communication specification | Complies with S-LINK V protocol. |
| Communications mode | B mode, C mode |
| Address setting | Input address (lever switch) : 0 to 255 Output address (lamp, shutter) : Select an offset of +32, +64, +128, or +256 from the input address. (Note) : Using optional remote controller. |
| Lever switch (Input) | Turns ON when lever switch is tilted to angle of 15° to 30° or pulled downward for a distance of about 2 mm 0.079 in or more. (Note) Pulling load is 19.6N or less. Make sure that stress by forcible bend or pulling is not applied directly to the lever part. |
| Lamp (Output) | Lamp (LED) color: Selectable from green (default), red, blue or 2-stage indication (green, blue) ・Turns ON when output signal from signal transmission line turns ON. ・Turns OFF when output signal from signal transmission line turns OFF. |
| Recommended shutter | Material: Danpla (plastic board) Maximum thickness: 5 mm 0.197 in Maximum weight: 50 g approx. Recommended size: W300 x H210 mm W11.811 x H8.268 in |
| Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation) . Storage: -20 to +60 ℃ -4 to +140 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Material | Front cover: Polycarbonate Lamp cover: Polycarbonate Rear case: ABS Pipe mounting holder: Cold rolled carbon steel (SPCC) Driving shaft: SUM Arm: Cold rolled carbon steel (SPCC) |
| Cable | 4-core cabtyre cable, 0.15 m 0.492 ft long (With a snap male connector SL-CP2) |
| Net weight | 250g approx. |
Accessories (Option)
To Be Discontinued
|
| Product Number | SL-VAR1 |
| Part Number | SL-VAR1 |
| Product | Address setting remote controller |
| Product name | Remote controller |
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
