Business > Industrial Devices > Automation Controls Top > Components & Devices > Relays / Couplers > Solid State Relays > Solid State Relays Lineup > AQ-H Solid State Relay > Rating/Performance
|
Item | Symbol | AQH0213 AQH0223 |
AQH1213 AQH1223 |
AQH2213 AQH2223 |
AQH3213 AQH3223 |
Remarks | |
---|---|---|---|---|---|---|---|
Input | LED forward current | IF | 50 mA | ||||
LED reverse voltage | VR | 6 V | |||||
Peak forward current | IFP | 1 A | f = 100 Hz, Duty Ratio = 0.1% |
||||
Output | Repetitive peak OFF-state voltage | VDRM | 600 V | ||||
ON-state RMS current | IT (RMS) | 0.3 A | 0.6 A | 0.9 A | 1.2 A | ||
Non-repetitive surge current | ITSM | 3 A | 6 A | 9 A | 12 A | In one cycle at 60 Hz | |
I/O isolation voltage | Viso | 5,000 Vrms | |||||
Ambient temperature | Topr | − 30 to + 85℃ | Non-icing and non-condensing |
||||
Storage temperature | Tstg | − 40 to + 125℃ | Non-icing and noncondensing | ||||
Junction temperature | Tj | 125°C |
* | Note: "A" and "AX" at the end of the part numbers have been omitted. |
---|
Item | Symbol | AQH0213 AQH1213 AQH2213 AQH3213 |
AQH0223 AQH1223 AQH2223 AQH3223 |
Remarks | ||
---|---|---|---|---|---|---|
Input | LED dropout voltage | Typical | VF | 1.21 V | IF = 20 mA | |
Maximum | 1.3 V | |||||
LED reverse current | Typical | IR | — | VR = 6 V | ||
Maximum | 10 µA | |||||
Output | Peak OFF-state current | Typical | IDRM | — | IF = 0 mA VDRM = 600 V |
|
Maximum | 100 µA | |||||
Peak ON-state voltage | Typical | VTM | — | IF = 10 mA ITM = Max. |
||
Maximum | 2.5 V | |||||
Holding current | Typical | IH | — | |||
Maximum | 25 mA | |||||
Critical rate of rise of OFF-state voltage | Minimum | dv/dt | 200 V/µs | VDRM = 600 V ×1/√2 | ||
Transfer characteristics |
Trigger LED current | Maximum | IFT | 10 mA | VD = 6 V RL = 100 Ω |
|
Zero-cross voltage | Maximum | VZC | 50 V | — | IF = 10 mA | |
Turn on time* | Maximum | TON | 100 µs | IF = 20 mA VD = 6 V RL = 100 Ω |
||
I/O isolation resistance | Minimum | Riso | 50 GΩ | 500 V DC |
Notes: | 1: For type of connection, see "SCHEMATIC AND WIRING DIAGRAMS". 2. "A" and "AX" at the end of the part numbers have been omitted. |
* | Turn on / Turn off time |
---|
|
Please use under recommended operating conditions to obtain expected characteristics.
Item | Symbol | Min. | Max. | Unit |
---|---|---|---|---|
Input LED current | IF | 15 | 25 | mA |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)