【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Measurement Sensors > Measurement Sensors > Laser Collimated Beam Sensor LA(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Class 1 type | ||
---|---|---|---|
Conforming standards / regulations |
IEC and JIS standards | FDA regulations | |
Model No. | LA-510 | LA-511 | |
CE marking directive compliance | EMC Directive, RoHS Directive | ||
Sensing width | 15 mm 0.591 in | ||
Sensing range | 500 mm 19.685 in | ||
Min. sensing object | ø0.1 mm ø0.004 in opaque object | ||
Repeatability | 10 μm 0.394 mil or less | ||
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | ||
Current consumption | Emitter: 35 mA or less, Receiver: 25 mA or less | ||
Comparative output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between comparative output and 0 V) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
||
Utilization category | DC-12 or DC-13 | ||
Response time | 0.5 ms or less | ||
Output operation | ON when the incident beam amount is less than the threshold level | ||
Short-circuit protection | Incorporated | ||
Analog output | Analog voltage ・Output voltage: 1 V (Darkest) to 5 V (Lightest) ・Output impedance: 75 Ω |
||
Slew rate | 8 V/ms or more | ||
Temperature characteristics | Within ±0.1 % F.S./℃ (with respect to sensing range at ambient temperature +20 ℃ +68 ℉) | ||
Remote interlock input | Laser is emitted when it is connected to 0 V, but not emitted when connected to +V or kept open | ||
Indicators | Operation | Red LED (lights up when the comparative output is ON) |
|
Laser emission warning | Red LED (lights up when laser is being emitted) |
||
Stable incident beam | Green LED (lights up under the stable light received condition) |
||
Laser beam alignment | Yellow LED x 4 (light up when laser beam is misaligned) |
||
Adjusters | Threshold level | Adjustment of threshold level for the comparative output, 18-turn endless adjuster | |
Span | Adjustment of span for the analog voltage output, 18-turn endless adjuster | ||
Pollution degree | 3 (Industrial environment) | ||
Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||
Ambient illuminance | Incandescent light: 10,000 lx or less at the light-receiving face | ||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | ||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | ||
Emitting element | Infrared semiconductor laser diode (Maximum output: 1.7 mW, Peak emission wavelength: 780 nm 0.031 mil) | ||
Enclosure earthing | Capacitor earth | ||
Material | Enclosure: Die-cast zinc alloy, Top cover: PPO, Front protection cover: Glass | ||
Cable | 0.2 mm2 5-core (emitter: 4-core) shielded cable, 3 m 9.843 ft long | ||
Cable extension (Note 2) | Extension up to total 50 m 164.042 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. (Synchronization wire cannot be extended.) | ||
Net weight | Emitter: 290 g approx., Receiver: 280 g approx. | ||
Accessories | MS-LA1 (Sensor mounting bracket): 1 set for emitter and receiver Adjusting screwdriver: 1 pc. Crimp contact: 2 pcs. Class 1 identification label: 1 pc. (LA-510 only) Inspection slip: 1 pc. (LA-511 only) |
Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|---|
Note 2 : | LA-510 and LA-511 are CE compliant and complies with EMC directives. EN 61000-6-2 is the applicable standard that covers immunities relating to use of this product, but in order to comply with this standard, the following conditions must be satisfied. |
Conditions
- This sensor should be connected less than 10 m 32.808 ft from the power supply.
- The signal line to connect with this sensor should be less than 30 m 98.425 ft.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)