【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Universal Sensor Mounting Stand MS-AJ
Eight types of mounting stands enable installation of sensors,
fibers, and reflectors at any desired position
Features
Easy adjustment of sensing position
Even after mounting a sensor, you can adjust the sensor easily.
|
Note: The elevation angle is ±20° for MS-AJ□-F (assembly for fiber). |
|
Mountable on vertical or horizontal plane
MS-AJ1(-□)
Securely fixed with two M6 screws
|
|
Cable can be neatly threaded into pipe
|
Note: Do not thread the fiber cable
into the pipe in case of MS-AJ-F (assembly for fiber).
|
Eight models
MS-AJ□ (Basic assembly)
It is used to mount CX-400, LS, EX-40 and EZ-10 series sensors, and the RF-210 reflector.
|
|
MS-AJ□-A (Lateral arm assembly)
A lateral arm is added to the MS-AJ□ basic assembly. Sensing is possible from above an assembly line.
|
|
MS-AJ□-M (Assembly for reflector)
The MS-AJ□ basic assembly is modified to mount a reflector. It can be used for RF-220 and RF-230 reflectors.
|
|
MS-AJ□-F (Assembly for fiber)
The sensor mounting bracket of MS-AJ□-A is replaced with a fiber mounting bracket. It can be used with FD-L51, FD-L52, FD-L53, FD-L54 and M3, M4 or M6 threaded head fibers.
|
|
Return to top
Return to top