【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Picking Switch for Shutter SL-VPK02
Discontinuation plan
|
September 30, 2025 |
|
|
Suitable for picking of important maintenance parts and safety-related parts for which erroneous picking must be prevented by all means!
Picking Switch for Shutter SL-VPK02 *The shutter is not supplied with the product. |
|
|
Features
|
Note: The product is equipped with an arm (shutter) that operates at high speed. Take note of the arm (shutter) moving range in order to prevent the arm (shutter) from hitting the worker's face or other parts of the body. |
|
Equipped with shutter for zero picking error
The shutter closes to prevent erroneous picking. The unit features a cantilever supporter and is compact, so it is suitable for installation on a narrowwidth shelf for miniature parts.
|
|
Four-stage setting for both opening angle and closing angle
The shutter operates properly even if the tray extends from the edge of parts shelf. The shutter closing delay time can also be adjusted in five stages.
|
|
Lamp colors selectable
It can be selectable from green (default), red, blue, and a two-stage indication (green, blue)*.
* The address setting remote controller (optional) is required for changing the lamp color.
Remote controller
The SL-VAR1 address setting remote controller (optional) enables easy setting of addresses and selection of lamp color. The remote controller helps reduce the setting workload during shelf rearrangement. The remote controller can be used repeatedly for changing settings.
Supports a wide frontage
The SL-VPK02 supports up to 600 mm 23.622 in in shutter width by using the dual-end shutter support fixture MS-PK02-W.
(However, the shutter weight should be 100 g or less.)
Return to top
Return to top