Search
Discontinued
Products



AKS1202 | KS1 Signal Converter

 

Email the information about AKS1202 | KS1 Signal Converter to whom you indicate.

Send to (email address):

To send multiple email addresses, separate them by using “Enter” key.

Sender (email address):

Message (optional):

300 character limit.

Your email has been sent.


KS1 Signal Converter

*Photo may vary from actual product.

  • RoHS Compliant

Product Number AKS1202
Part Number AKS1202
Product Name KS1 Signal Converter
Series KS1 Signal Converter
Features RS232C/RS485 Data can be easily monitored by LAN!!

As of October 24, 2014

Spec Detail

Item Specifications
Product Number AKS1202
Part Number AKS1202
Features RS232C/RS485 Data can be easily monitored by LAN!!

General specifications

Item Specifications
Rated voltage 24 V DC
Operating voltage range 90 to 110 %V of rated voltage (21.6 to 26.4 V DC)
Inrush current 12 A or less
Current consumption 200 mA or less
Allowed momentary power off time 10 ms
Fuse Built-in type
Terminal screw M2
Ambient temperature 0 to 55 degrees
Storage temperature -20 to +75 degrees
Ambient humidity 30 to 85 % RH (at 20 degrees , non-condensing)
Breakdown voltage(initial) 500 V AC 1 minute, RS485 terminals ⇔ Combined power and ground terminals
Insulation resistance(initial) 100 Mohm or higher (500 V DC using an insulation resistance meter), RS485 terminals ⇔ Combined power and ground terminals
Vibration resistance 10 to 55 Hz, 1 cycle / min.: double amplitude of 0.75 mm, 1 hour on 3 axes
Shock resistance 294 m / s2 or more, 5 times on 3 axes
Dimensions 25 x 60 x 90
Weight Approx. 80 g

Communication specifications

Item Specifications
Ethernet Interface: IEEE802.3u, 10BASE-T / 100BASE-TX
Connector shape: RJ45
Transmission specifications (Transmission speed): 10 Mbps / 100 Mbps
Transmission specifications (Transmission method): Base band
Transmission specifications (Max. segment length): 100 m
Communication cable: Category 5 UTP cable
Protocol: MODBUS TCP (RTU, ASCII), TCP / IP
Functions: Auto negotiation function, MDI / MDI-X, Auto crossover function
RS232C Interface: RS232C (non-insulated)
Conversion COM port: COM1 (Note)
Communication style: 1: 1 communication
Number of connectable stations: 1 station
Communication method: Full duplex
Synchronous method: Start-stop synchronization
Transmission distance: 15 m
Communication speed: 2,400, 4,800, 9,600, 19,200, 38,400, 57,600 and 115,200 bps
Number of connectable connections: 3
COM receive time out: Setting range: 10 ms to 60 s
Non-communication time before disconnection: Setting range: 0 to 1,800 s (Not disconnected when set to ''0''.)
Conversion and transmission format (Data length): 8 bits fixed
Conversion and transmission format (Parity): Odd / Even / None
Conversion and transmission format (Stop bit): 1 bit / 2 bits
Conversion and transmission format (End code): CR, CR + LF, None
Ethernet ⇒ Serial conversion: Command / Response system
(Note) COM1 and COM2 can be used simultaneously.
RS485 Interface: RS485 (insulated)
Conversion COM port: COM2 (Note 1)
Communication style: 1: N communication
Number of connectable stations: 99 stations max.
Communication method: Half duplex
Synchronous method: -
Transmission distance: Max. 1,200 m (Note 2)(Note 3)
Communication speed: 2,400, 4,800, 9,600, 19,200, 38,400, 57,600 and 115,200 bps
Number of connectable connections: 3
COM receive time out: Setting range: 10 ms to 60 s
Non-communication time before disconnection: Setting range: 0 to 1800 s (Not disconnected when set to ''0''.)
Conversion and transmission format (Data length): 8 bits fixed
Conversion and transmission format (Parity): Odd / Even / None
Conversion and transmission format (Stop bit): 1 bit / 2 bits
Conversion and transmission format (End code): CR, CR+LF, None
Ethernet ⇒ Serial conversion: Command / Response system
(Note 1) COM1 and COM2 can be used simultaneously.
(Note 2) When connecting a commercially available device, please confirm operation using the actual device. In some case, the number of stations, transmission distance, and communication speed vary depending on the connected device.
(Note 3) The values for the transmission distance, communication speed and number of stations should be within the values noted in the graph.

Return to top

Accessories (Option)

no_image
Product Number AFP0803
Part Number AFP0803
Series Mounting plate
no_image
Product Number AFP0804
Part Number AFP0804
Series Mounting plate
no_image
Product Number AFP0806
Part Number AFP0806
Series Screwdriver for terminal socket


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region.







BY PHONE

FAQ