Search
Discontinued
Products



ANPV0202ADP | PV200

 

Email the information about ANPV0202ADP | PV200 to whom you indicate.

Send to (email address):

To send multiple email addresses, separate them by using “Enter” key.

Sender (email address):

Message (optional):

300 character limit.

Your email has been sent.


no_image

*Photo may vary from actual product.


Product Number ANPV0202ADP
Part Number ANPV0202ADP
Product Name PV200 IMAGECHECKER Controller unit
Details 2-camera type
Series PV200
Features Improved inspection reliability while reducing engineering time

As of September 02, 2014

Spec Detail

Item Specifications
Product Number ANPV0202ADP
Part Number ANPV0202ADP
Features Improved inspection reliability while reducing engineering time
General specifications : Rated operating voltage 24 V DC
General specifications : Operating voltage range 21.6 to 26.4 V DC (including ripples)
General specifications : Rated current consumption 1.2 A max.
General specifications : Ambient temperature during use 0 to +45 degrees 32 to +113 degrees Fahrenheit (no freezing or condensation)
General specifications : Storage ambient temperature -20 to +60 degrees -4 to +140 degrees Fahrenheit (no freezing or condensation)
General specifications : Ambient humidity during use 35 to 85 % RH (at 25 degrees 77 degrees Fahrenheit, no freezing or condensation)
General specifications : Storage ambient humidity 35 to 85 % RH (at 25 degrees 77 degrees Fahrenheit, no freezing or condensation)
General specifications : Noise immunity 1,000 V, Pulse width: 50 ns, 1 micros (using the noise simulator method)
General specifications : Vibration resistance 10 to 55 Hz, 1 sweep/min, double amplitude of 0.75 mm 0.03 in, 30 minutes each in the X, Y, and Z directions
General specifications : Shock resistance 196 m/s2, 5 times each in the X, Y and Z directions
General specifications : Insulation resistance (initial value) 100 MOhm or higher (measured by a 500 V DC megger) *
Input and output terminals -- Power and ground terminals
Input and output terminals -- Non-energized metal part
Power terminal -- Non-energized metal part
* The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.
General specifications : Breakdown voltage (initial value) 500 V AC for 1 min (600 V AC for 1 sec), Cutoff current: 10 mA *
Input and output terminals -- Power and ground terminals
Input and output terminals -- Non-energized metal part
Power terminal -- Non-energized metal part
* The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.
General specifications : Battery life 10 years approx. (at 25 degrees 77 degrees Fahrenheit)
General specifications : Weight 0.5 kg approx. (including terminal blocks)
General specifications : Pollution degree Pollution degree 2
Functional specifications : CPU 32-bit, RISC CPU & DSP
Functional specifications : Input/output : Cameras Up to two cameras selected from among 0.3M grey/grey compact/color cameras (640 x 480) and
2M grey/color cameras (1,600 x 1,200) can be connected.
Up to two 4M grey cameras can be connected.
* The 4M grey camera cannot be used in combination with another type of camera.
The ANPVC82** dedicated compact camera cable is required to connect the compact cameras.
Functional specifications : Input/output : Monitor output VGA (640 x 480) output
Functional specifications : Input/output : Memory card SD/SDHC memory card
Functional specifications : Input/output : PLC communication compatible models (RS232C) Panasonic Electric Works SUNX: FP series
OMRON: C, CV, and CS1 series
Mitsubishi Electric: A, Q, FX, and FX2N series
Fuji Electric: MICREX-SX SPH series
Allen-Bradley: SLC500 series
Modbus RTU compatible (performance confirmed with Siemens S7-1200)
Functional specifications : Input/output : PLC communication compatible models (Ethernet) Panasonic Electric Works SUNX: FP series, ET-LAN unit
Mitsubishi Electric: Q series
Functional specifications : Input/output : PLC communication command Specifiable external command instruction using PLC communication Command input format: polling / parallel input
Functional specifications : Input/output : Parallel 14 inputs / 15 outputs
Functional specifications : Input/output : Keypad input Connector for dedicated keypad (ANPVP**), 1 channel
Functional specifications : Input/output : USB USB 2.0, A-B type (Only PVWIN200)
Functional specifications : Menu display Four languages (five fonts), Switchable (Japanese, English, Korean, Traditional Chinese and Simplified Chinese)
Functional specifications : Monitor display (VGA) Split-screen display of up to two camera images, Zoom function (2 to 400%)
Image display: Through/Memory/NG object images
Display effects: Greyscale/Slice level group/Preprocessing group/Color/Extraction and binary/Grey
conversion image, Display area (640 x 480)
Functional specifications : Processing methods Greyscale processing/Thresholding processin/Color extraction/Grey conversion
Functional specifications : Processing resolution 2M camera (grey/color): 1,600 horizontal x 1,200 vertical pixels
0.3M camera (grey/grey compact/color): 640 horizontal x 480 vertical pixels
4M camera (grey): 2,048 horizontal x 2,048 vertical pixels
Functional specifications : Trigger input Select from: All cameras or detection trigger
Functional specifications : Number of connected cameras Up to two cameras
Functional specifications : Camera connection Connection by Power Over Camera Link (PoCL)
Functional specifications : Capture method Frame shooting only. Capable of partial capture of one point
In partial capture mode, the minimum capture area to be set for the 0.3M/4M camera is
one line, and that for the 2M camera is 100 lines.
(The area can be set in increments of one line for the grey camera, and two lines for the color camera.)
Functional specifications : Shutter speed 30 micros to 1,000 ms (Set in increments of 10 micros)
0.3M camera (grey compact):100 micros to 500 ms (Set in increments of 10 micros)
Functional specifications : Gain setting range 1.0 to 5.0
Functional specifications : No. of product types 256 types max. (depends on setting data)
Functional specifications : Password Switching from the current operating screen to the setup screen can be password controlled (within 15 characters).
Administration classification: invalid/valid (limit setting screen transition and limit regular menu switching)
Functional specifications : Inspection functions (Checkers) 1,000 checkers/product type max., including those for geometry calculation and
character/figure drawing (depends on setting data)
Position adjustment, Position rotation adjustment, Rotation adjustment area size adjustment, Line, Binary window, Grey
window, Binary edge, Grey edge, Feature extraction, Smart matching, Contour matching, Flaw detection, Connector (binary window), Connector (grey window), Connector (grey edge), Smart edge (circles), Smart edge (line), Color window
* Number of range masks: 16 ranges/checker
* Maximum registrable number of smart matching and contour matching templates: 2,000 pcs.
Functional specifications : Geometry calculation 1,000 checkers/product type max., including those for inspection functions and character/figure drawing (depends on setting data)
Seven calculation functions (distance between two points, intersection of two lines, median lines of two lines, perpendicular distance, approximate straight line, approximate circle, and approximate ellipse)
Functional specifications : Character/Figure drawing Up to 10,000 characters/graphics (1,000 checkers x 10)/product type can be displayed
on the images (depends on setting data).
Functional specifications : Inspection operation mode Sequential processing: After completing the result output, the next image capture for inspection can be started.
Parallel processing: After the capture and the synchronized output of results of the previous inspection are completed, the image
capture process for the next inspection is ready to start, and then the capture and inspection results output are processed concurrently.
Functional specifications : Slice level group 16 group/camera, 256-grey scale (0 to 255)
Functional specifications : Image preprocess Preprocessing selections: Grey conversion / Color extraction / Grey preprocessing
Functional specifications : Image preprocess : Grey conversion Available only when a color camera is connected. For each product type, 16 groups/camera
Each R/G/B value setting for grey conversion can be changed within the range of -1,000 to 1,000.
Functional specifications : Image preprocess : Color extraction Available only when a color camera is connected. Color extraction mode: Selectable between high speed and expansion
Number of extractable colors; High speed: A total of 16 colors when one camera is connected and eight colors when two cameras are connected.
Expansion: A total of 128 colors when one camera is connected and 64 colors when two cameras are connected.
Only eight registered colors can be selected from one checker.
Functional specifications : Image preprocess : Grey preprocessing For each product type, 16 groups/camera, 10 stages max.
Preprocessing filters: 21 types
(Dilation, Erosion, Erosion to Dilation, Dilation to Erosion, Auto correction, Grey cut, Area averaging, Correction settings, Median, Smoothing, Sobel, Prewitt, Laplacian, Edge extraction X, Edge extraction Y, Sharpen, Tophat, Dynamic, Grey difference, Rotation, and Reflect)
Functional specifications : Numerical calculation 1,000 formulas/product type max., including those for judgement output (depends on setting data)
Calculations involving output values of inspection functions
Functional specifications : Numerical calculation : Operators Four fundamental operations (+, -, x, /), Bracket operations, Trigonometric functions (14 types), Comparison functions
(6 types), Math functions (15 types), Geometry functions (18 types), Coordinate conversion functions (8 types)
Functional specifications : Numerical calculation : Statistic data operation items Scan count/OK count/NG count/Average/Variance/Max./Min./Range/OK average/
OK variance/OK judgment max./OK judgment min./OK range/NG average/NG variance/
NG judgment max./NG judgment min./NG range User limit: 1,000 items /product type max.
Functional specifications : Numerical calculation : Other operation items Previous data of numerical calculation and judgment results, general-purpose registers
Functional specifications : Numerical calculation : Number of reference operators 16 items/formula max.
Functional specifications : Judgement output 1,000 formula/product type max., including those for numerical calculation (depends on setting data)
Substitution for and logical calculation of judgement results from checkers and numerical calculations
Functional specifications : Judgement output : Operators NOT/AND/OR/XOR/Brackets
Functional specifications : Judgement output : Number of reference items 16 items/formula max.
Functional specifications : Judgement output : Others Total judgment conditions, save image conditions, Image output conditions,
parallel output setting (8 outputs from OUT0 to OUT7 and 16 outputs from OUT0 to OUT15, or all setting output)
Functional specifications : Collective moving Collective movement of set checkers in units of position/rotation adjustment groups
Specify the "Move" or "Not move" option for each checker type.
Position and rotation adjustment checkers cannot be moved.
Functional specifications : Marker 8 markers/product type max. for each camera, Graphic display on the operation screen, Selectable from six colors
Functional specifications : Marker : Shapes Rectangle/Circle, Ellipse/Polygon/Line/Cross
Functional specifications : Data R/W Two-window display of up to 80 (5x16) cells/product type on screen in table form in RUN mode
Substitution of title input, checker conditions/results, numerical calculation results, numerical calculation judgment results,
judgment results, statistical results possible. Change of upper/lower limits of numerical computation in the table in RUN mode possible.
Functional specifications : Select menu Maximum registrable number of arbitrary setup items in setup screen on menu: 16 items x 50 pages/type.
Functional specifications : Select menu : Registration information Button / Text / Page move / Separator
Functional specifications : Select menu : Button allocation method FUNC key for item / Selection from list
Functional specifications : Select menu : Others Page name registration possible
Functional specifications : Calibration Coordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions for each product type.
Functional specifications : Calibration : Processing method Unit conversion / 1 point coordinate conversion / 2 point coordinate conversion / 3 points coordinate conversion
Functional specifications : Calibration : Operation method Static / Dynamic
Functional specifications : Calibration : Standard registration Arbitrary position / Smart matching / Contour matching / Intersection / Centre of circle / Feature extraction
Functional specifications : Conversion data Coordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions.
Functional specifications : Conversion data : Others Comment input
Functional specifications : Template re-registration settings : Position Set position/Adjusted position
Functional specifications : Template re-registration settings : Display Yes/No
Functional specifications : Execution mode : Normal execution Execution of all checkers
Functional specifications : Execution mode : Branch execution Destination blocks (0 to 9) can be set.
Functional specifications : Execution mode : Designated execution Blocks to be executed (0 to 9) can be set.
Functional specifications : External input/output functions : Input : Inspection start instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Re-inspection start instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Product type change instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Template re-registration instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Display layout switch instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Operation/stop switch instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Statistics reset instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Error reset instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to save setting data in the built-in memory Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to save setting data in the SD memory card Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to read setting data from the built-in memory Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to read setting data from the SD memory card Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to cancel the saving/reading of setting data Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to save the image memory in the SD memory card Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to erase the image memory Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to print the screenshot Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Inspection/processing cancellation instruction Parallel, Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to save the latest inspection image Parallel
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to read/change the set value Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Instruction to prohibit the keypad screen operation Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : Keypad emulation instruction Serial, Ethernet
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Input : PLC communication command read instruction Parallel
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Output : Scanning operation count Parallel, Serial, Ethernet, SD memory card
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Output : Total judgement output Parallel, Serial, Ethernet, SD memory card
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Output : Judgement calculation (JD) result output Parallel, Serial, Ethernet, SD memory card
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Output : Numerical calculation result output Parallel, Serial, Ethernet, SD memory card
* USB cannot be used for the external input/output functions.
Functional specifications : External input/output functions : Output : Image output Ethernet *1, SD memory card
* USB cannot be used for the external input/output functions.
*1 Image and screenshot output functions via Ethernet are received by dedicated software, Image Receiver for PV.
Functional specifications : External input/output functions : Output : Screenshot output Ethernet *1, SD memory card
* USB cannot be used for the external input/output functions.
*1 Image and screenshot output functions via Ethernet are received by dedicated software, Image Receiver for PV.

Return to top

Accessories (Option)

no_image
Product Number ANB842NL
Part Number ANB842NL
Series Lenses for camera
no_image
Product Number ANB843L
Part Number ANB843L
Series Lenses for camera
no_image
Product Number ANB845NL
Part Number ANB845NL
Series Lenses for camera


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region.







BY PHONE

FAQ