Business > Industrial Devices > Automation Controls Top > Components & Devices > Connectors > FPC/FFC Connectors > Y3B (0.3mm pitch) > Rating/Performance
Slim, pitch 0.3 mm and double top and bottom contacts construction
|
The followings show specifications, when using an applicable FPC (thickness 0.20 mm)
Item | Specifications | Conditions | |
---|---|---|---|
Electrical characteristics |
Rated current | 0.2 A/pin contact (For Min. 61 pins: Max. 12 A at total contacts) | |
Rated voltage | 50 V AC/DC | ||
Dielectric strength | 150 V AC for 1 min | No short-circuiting or damage at a detection current of 1 mA when the specified voltage is applied for one minute. | |
Insulation resistance | Min. 1,000 MΩ (initial) | Using 250 V DC megger (applied for 1 min) | |
Contact resistance | Max. 100 mΩ | Based on the contact resistance measurement method specified by JIS C 5402. | |
Mechanical characteristics |
FPC holding force | Min. 0.13 N/pin contact x pin contacts (initial) | Measurement of the maximum force applied until the inserted compatible FPC is pulled out in the insertion axis direction while the connector lever is closed |
Environmental characteristics |
Ambient temperature | –55 to +85°C | No icing. No condensation. |
Soldering heat resistance | The initial specification must be satisfied electrically and mechanically. | Reflow soldering: Peak temperature: 260°C or less (on the surface of the PC board around the connector terminals) Soldering iron: 300°C within 5 sec. 350°C within 3 sec. |
|
Storage temperature | –55 to +85°C (product only) –40 to +50°C (emboss packing) |
No icing. No condensation. | |
Thermal shock resistance (with FPC mated) |
5 cycles, insulation resistance Min. 100 MΩ, contact resistance Max. 100 mΩ |
Conformed to MIL-STD-202F, method 107G |
|
Humidity resistance (with FPC mated) |
120 hours, insulation resistance Min. 100 MΩ, contact resistance Max. 100 mΩ |
Conformed to IEC60068-2-78 Temperature 40±2°C, humidity 90 to 95% RH |
|
Saltwater spray resistance (with FPC mated) |
24 hours, insulation resistance Min. 100 MΩ, contact resistance Max. 100 mΩ |
Conformed to IEC60068-2-11 Temperature 35±2°C, saltwater concentration 5±1% |
|
H2S resistance (with FPC mated) |
48 hours, contact resistance Max. 100 mΩ |
Temperature 40±2°C, gas concentration 3±1 ppm, humidity 75 to 80% RH |
|
Lifetime characteristics |
Insertion and removal life | 20 times | Repeated insertion and removal: Min. 10 sec./time |
Unit weight | 61 pins: 0.10 g |
Part name | Material | Surface treatment |
---|---|---|
Molded portion | Housing: LCP resin (UL94V-0) Lever: LCP resin (UL94V-0) |
— |
Contact | Copper alloy | Contact portion; Base: Ni plating, Surface: Au plating Terminal portion; Base: Ni plating, Surface: Au plating |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)