DZ-S Relays
DZ-S Relays Cautions for Use
2.This relay is designed to dust cover type. Malfunction and contact failure may result if small insects get inside the relay.
3.Do not apply excessive pressure on the terminals. This could adversely affect relay performance. Use a washer in order to prevent deformation.
Keep the installation torque to within 1.2 to 1.4 N·m (12 to 14 kgf·cm). Also, use a spring washer to prevent it from loosening.
4.It is recommended to apply rated coil voltage for Min. 100ms pulse across the ambient temperature and condition change through service life. the coil to secure the sure operation considering
5.Please do not continuously energize to coil over 10 seconds.
Return to top
Return to top