In the industrial space, reliability is a measure of how long a particular product operates without failure.
Every product has a finite service lifetime. This means that no product can continue normal service infinitely. When a product has broken down, the user may throw it away or repair it. The reliability of repairable products is recognized as "reliability in a broad sense of the term." For repairable products, their serviceability or maintainability is another problem. In addition, reliability of product design is becoming a serious concern for the manufacturing industry. In short, reliability has three senses: i.e. reliability of the product itself, serviceability of the product, and reliability of product design.
Reliability is "built" into products. This is referred to as intrinsic reliability which consists mainly of reliability in the narrow sense. Product reliability at the user's site is called "reliability of use," which consists mainly of reliability in the broad sense. In the relay industry, reliability of use has a significance in aspects of servicing.
Reliability (narrow sense), durability
Long life time: MTTF, B10, R(T),
|Low failure rate: Lamda (λ), MTBF|
Preventive maintenance, predicted
Human factor, redundancy,
The following list contains some of the most popular reliability measures:
|Reliability measure||Sample representation|
|Degree of reliability R(T)||99.9%|
|Failure rate lambda||20 fit, 1%/hour|
|Safe life B10||50 hours|
Degree of reliability represents percentage ratio of reliability. For example, if none of 10 light bulbs has failed for 100 hours, the degree of reliability defined in, 100 hours of time is 10/10 = 100%.
If only three bulbs remained alive, the degree of reliability is 3/10 = 30%.
The JIS Z8115 standard defines the degree of reliability as follows:
The probability at which a system, equipment, or part provides the specified functions over the intended duration under the specified conditions.
MTBF is an acronym of mean time between failures. It indicates the mean time period in which a system, equipment, or part operates normally between two incidences of repair. MTBF only applies to repairable products.
MTBF tells how long a product can be used without the need for repair.
Sometimes MTBF is used to represent the service lifetime before failure.
MTTF is an acronym of mean time to failure. It indicates the mean time period until a product becomes faulty MTTF normally applies to unrepairable products such as parts and materials.
The relay is one of such objective of MTTF.
Failure Failure rate includes mean failure rate and momentary failure rate.
Mean failure rate is defined as follows:
Mean failure rate = Total failure count/total operating hours
In general, failure rate refers to momentary failure rate. This represents the probability at which a system, equipment, or part, which has continued normal operation to a certain point of time, becomes faulty in the subsequent specified time period.
Failure rate is often represented in the unit of percent/hours.
For parts with low failure rates,
“failure unit (Fit) = 10–9 /hour”
is often used instead of failure rate.
Percent/count is normally used for relays.
Safe life is an inverse of degree of reliability. It is given as value B which makes the following equation true:
1 - R(B) = t%
In general, "B[1 - R(B)] = 10%" is more often used. In some cases this represents a more practical value of reliability than MTTF.
Failure is defined as a state of system, equipment, or component in which part of all of its functions are impaired or lost.
Product's failure rate throughout its lifetime is depicted as a bathtub curve, as shown below. Failure rate is high at the beginning and end of its service lifetime.
The high failure rate in the initial failure period is derived from latent design errors, process errors, and many other causes. Initial failures are screened at manufacturer's site through burn-in process. This process is called debugging, performing aging or screening.
The initial failure period is followed by a long period with low, stable failure rate. In this period, called accidental failure period, failures occurs at random along the time axis. While zero accidental failure rate is desirable, this is actually not practical in the real world.
In the final stage of the product's service lifetime comes the wear-out failure period, in which the life of the product expires due to wear of fatigue. Preventive maintenance is effective for this type of failure. The timing of a relay's wear-out failure can be predicted with a certain accuracy from the past record of uses. The use of a relay is intended only in the accidental failure period, and this period virtually represents the service lifetime of the relay.
Weibull analysis is often used for classifying a product's failure patterns and to determine its lifetime.
Weibull distribution is expressed by the following equation:
Weibull distribution can be adopted to the actual failure rate distribution if the three variables above are estimated.
The Weibull probability chart is a simpler alternative of complex calculation formulas. The chart provides the following advantages:
The following describes the correlation with the bathtub curve. The value of the parameter "m" represents the type of the failure.
|(1) When m < 1||:||Initial failures|
|(2) When m = 1||:||Accidental failures|
|(3) When m > 1||:||Wear-out failures|
|JP||596.0KB||January 31, 2019|
Power Relays(Over 2A),Safty Relays,Signal Relays(2A or less),Microwave Devices,Control Panel Relays,High-capacity DC Cutoff Relays and Interface Terminal.
|EN||40.9KB||February 28, 2014|
|关于可靠性||CN-Simplified||416.1KB||August 9, 2019|
|Use MOSFETs in output elements. Semiconductor relay for AC and DC load control.|
|Power Relays (Over 2A)|
|Mechanical relay with greater than 2A nominal switching capacity that is ideal for power supply applications.|
|Safety relay ideal for safety circuit construction , with forcibly guided contact structure.|
|Solid State Relays|
|Semiconductor relay ideal for heater control, etc. SSR (Solid State Relay)|
|Signal Relays (2A or less)|
|Mechanical relay ideal for signal control, etc., with less than 2A nominal switching capacity.|
|Lineup spans from relays to coaxial switches. High-frequency devices that support high bandwidth frequencies.|
|Relays for automotive electrics that includes plug-in PCB type.|
|Control Panel Relays|
|Relays for general purpose switching (Various types are prepared for multiple applications)|
|High-capacity DC Cutoff Relays|
|400 V DC high voltage switching possible. Up to 300 A current capacity type available.|
|Optical switches that make high-speed optical communication switching possible.|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)