Vdd: Input power source (DC), GND: GND, Out: Output (Comparator)
|Note)||The output signal for the digital output type is from inside FET drain, therefore pull-down resistors are necessary. Please select an output resistor (pull-down concept) in accordance with Vout so that the output current is lower than or equal to 100μA. Use 50KΩ or more as a guide line. If the output current is more than 100μA, this may cause false alarms.|
|Note)||This is the reference circuit which drives the PIR motion sensor. Install a noise fi lter for applications requiring enhanced detection reliability and noise withstanding capability.
Differences in the specifi cations of electronic components to which the units are connected sometimes affect their correct operation; please check the units’ performance and reliability for each application. Panasonic Corporation, Ltd. accepts no responsibility for damages resulting from the use of this circuit.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)