Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Timers / Counters / FA Componets > Timers > QM4H Digital Timers(DIN 48)(Discontinued Products) > Rating/ Performance

QM4H Digital Timers(DIN 48) (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 30, 2019

Discontinued Products
Information

Rating/ Performance

Rating/ Performance

Item/Type			QM4H-S		QM4H-G
Rating	Rated operating voltage		12 to 48 V AC/DC and 100 to 240 V AC/DC
	Rated power consumption	12 to 48 V AC/DC	During time delay	12 V DC, 48 V DC: Max. 1.5W 12 V AC, 48 V AC: Max. 3.0 VA	During time delay	12 V DC, 48 V DC: Max. 1.0W 12 V AC, 48 V AC: Max. 2.0 VA
		12 to 48 V AC/DC	After time delay	12 V DC, 48 V DC: Max. 2.5W 12 V AC, 48 V AC: Max. 5.0 VA	After time delay	12 V DC, 48 V DC: Max. 1.5W 12 V AC, 48 V AC: Max. 3.5 VA
		100 to 240 V AC/DC	During time delay	100 V DC, 240 V DC: Max. 1.5W 100 V AC, 240 V AC: Max. 3.0 VA	During time delay	100 V DC, 240 V DC: Max. 1.0W 100 V AC, 240 V AC: Max. 2.5 VA
		100 to 240 V AC/DC	After time delay	100 V DC, 240 V DC: Max. 2.0W 100 V AC, 240 V AC: Max. 4.0 VA	After time delay	100 V DC, 240 V DC: Max. 1.8W 100 V AC, 240 V AC: Max. 3.2 VA
	Rated frequency		50/60 Hz common (at AC)
	Rated control capacity		5 A, 250V AC (resistive load)
	Time range		0.01s to 9990h, Selection of 8 range: 0.01s/0.1s/1s/0.1min/1min/0.1h/1h/10h
	Operation mode		Power ON delay		Power ON delay (with reset and stop terminals)
	Min. input signal width		-		20ms (Reset and Stop inputs)*4
Time accuracy*1	Operating time fluctuation		±(0.01%+0.05s) in case of power on start ±(0.005%+0.03s) in case of input reset start*2 [Operating voltage: 85 to 110% V Temperature: -10 to +55°C/ +14 to 131°F (20°C 68°F) Stopped time: 0.1 sec to 1 hour]
	Temperature error
	Setting error
	Voltage error
Contact	Contact arrangement		T.D. mode: Time delay 2C INST. mode: Time delay 1C and Instantaneous 1C (Use MODE switch on front)		Time delay 1C
Contact	Contact material		Silver alloy
Life*3	Mechanical (contact)		Min. 10⁷
Life*3	Electrical (contact)		Min. 10⁵ (at rated control vltage)
Electrical	Allowable operating voltage range		85 to 110% of rated operating voltage
	Breakdown voltage (Initial value)		Between live and dead metal parts, between input and output, between contact sets, between contacts Min. 100 MΩ (at 500 V DC megger)
	Insulation resistance (Initial value)		Between live and dead metal parts: 2, 000 Vrms for 1 min Between input and output: 2, 000 Vrms for 1 min Between contact sets: 2, 000 Vrms for 1 min Between contacts: 1, 000 Vrms for 1 min
	Reset time		Max. 0.1s
Mechanical	Vibration resistance	Functional	10 to 55 Hz: 1 cycle/min. single amplitude of 0.25 mm .010 inch (10 min on 3 axes)
	Vibration resistance	Destructive	10 to 55 Hz: 1 cycle/min. single amplitude of 0.375 mm .015 inch (1h on 3 axes)
	Shock resistance	Functional	98 m/s² (4 times on 3 axes)
	Shock resistance	Destructive	980 m/s² (5 times on 3 axes)
Operating conditions	Ambient temperature		-10 °C to 55°C/ +14°F to +131°F
	Ambient humidity		Min. 35 to 85% RH (non-condensing)
	Air pressure		860 to 1060 hPa
Others	Mass (Weight)		Approx. 130 g 4.59 oz		Approx. 120 g 4.23 oz
	Available standards		UL, c-UL, CE
	Operating display		LED (red), During time delay: blinking, After time delay: OFF

*1 Unspecified measuring conditions are rated operating voltage (in case of DC type, ripple rate of 5% or less), ambient temp. 20℃ 68℉, and stop time 1 second.

*2 Reset start applies to QM4H-G type.

*3 Excluding switches

*4 Note that if the QM4H-G type is set to zero “0” and a STOP signal is input, output will begin when the power is turned on.

*5 The protective structure on the AQM4801 is IP50, and IP64 for the AQM4803.

*1	Unspecified measuring conditions are rated operating voltage (in case of DC type, ripple rate of 5% or less), ambient temp. 20℃ 68℉, and stop time 1 second.
*2	Reset start applies to QM4H-G type.
*3	Excluding switches
*4	Note that if the QM4H-G type is set to zero “0” and a STOP signal is input, output will begin when the power is turned on.
*5	The protective structure on the AQM4801 is IP50, and IP64 for the AQM4803.