FAYb Laser Marker LP-RF


Model No. LP-RF200P
Laser type Yb fiber laser; λ= 1,064 nm 0.0419 mil Class4 laser
Average oscillator output 20 W
Average output
at processing point
(Note 1)
17 W (±5 %) Pulse oscillation
Guide laser / pointer Red semiconductor laser; λ= 655 nm 0.026 mil; Class 2 laser: Maximum output 1 mW or less
Scanning method Galvano scanning method
Marking field 90 mm × 90 mm 3.543 in × 3.543 in
Work distance
(Note 2)
190 mm 7.480 in
Scan speed
(Note 3, 4)
Maximum 12,000 mm/sec. 472.441 in/sec.
Compatible line speed
(Note 4)
Maximum 240 m/min. 787.402 ft/min.
Character types English uppercase letters, English lowercase letters, numerals, katakana, hiragana,
kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50), True type
Barcodes Code39, Code128 (GS1-128), ITF, NW-7, EAN/UPC/JAN
GS1 DataBar Limited, GS1 DataBar Stacked,
GS1 DataBar Limited CC-A, GS1 DataBar Stacked CC-A
2D codes QR Code, Micro QR Code, iQR Code, Data Matrix, GS1 Data Matrix, PDF417
Figure data
(Note 5)
Input / output port I/O terminal block (40 pins), I/O connector (40 pins)
Interface EIA-RS-232C, Ethernet
Cooling method Head: Naturally air cooling, Controller: Forced air cooling
Power supply
(Note 6)
180-264 V AC (including power voltage fluctuation of ±10 %), 50/60 Hz
Power consumption
(Note 7)
370 VA or less (2.1 A or less)
Protection degree Head: IP64
Ambient temperature
(Note 8,9)
0 to +40 ℃ +32 to +104℉
Storage ambient
(Note 8)
-10 to +60 ℃ +14 to +140
Ambient humidity
(Note 8)
35 to 85 % RH
Net weight Head 8 kg approx.
Controller 37 kg approx.
Applicable standards FDA regulations, CE marking (Note 11), GB standard, KC mark
Supplied software Laser Marker Smart Utility (Laser Marker NAVI Smart, logo data editing software, ExportVec, font maker software)
Laser Marker NAVI Smart
display language
Japanese, English, Chinese (simplified Chinese character), German
OS supported by the supplied software
(Note 10)
Windows® 10 Pro (32 bit, 64 bit), Windows® 8 Pro (32 bit, 64 bit),
Windows® 7 Professional SP1 (32 bit, 64 bit)


1) This indicates the output power at processing point when maximum power is set. (Factory default)
2) There may be an individual difference of approximately ±0.5 mm ±0.02 in in the work distance.
3) The indicated values show the allowable setting range. The setting values that can maintain the marking / processing quality vary depending on the marking condition and target material.
4) Depending on the setting data, the scan speed may be subject to upper-limit restriction in some cases.
5) VEC is a figure file format designed exclusively for laser markers. If figure files in the AI or EPS format are used, they must be converted to VEC-format files in advance using the ExportVEC software provided with the product.
6) Frequency is selected and set automatically.
7) The rush current (typical value) at startup is as follows: 220 V AC (current flowing time of 10 ms or less): 50 A
8) Common to the controller and head. There must be no dew condensation or icing.
9) Laser power setting of 46 or higher: 0 to +36 ℃ +32 to +97 ℉,
Laser power setting of 1 to 45: 0 to 40 ℃ 32 to 104 ℉
10) Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.
11) From the production on September, 2019.


・This catalog is a guide to select a suitable product. Be sure to read instruction manual attached to the product prior to its use.

  • This product is classified as a Class 4 Laser Product in IEC / JIS / FDA* regulations 21 CFR 1040.10 and 1040.11. Never look at or touch the direct laser beam and its reflection.
  • The laser used by this product generates infrared light that is invisible to the human eye. Use particular caution when the laser is operating.
  • The following labels are attached to the LP-RF series. Handle the product according to the instruction given on the warning labels. (Warning labels are not shown in the product photographs in this catalog.)
* This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice
No. 50, dated June 24, 2007, issued by CDRH.

Safety standards for laser beam products

  • A laser beam can harm human being’s eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements.
    The LP-RF series are classified as Class 4 laser.

Overview of classification by IEC 60825-1

Classification Description
Class 4 Lasers that are also capable of producing hazardous diffuse reflections. They may cause skin injuries and could also constitute a fire hazard.

Safe use of laser products

  • For the purpose of preventing user from suffering injuries by laser products, IEC 60825-1 (Safety of laser products).
    Kindly check the standards before use.

Recommended use of a dust collector

  • Depending on the object being marked, harmful gasses or smoke thet have a detrimental effect on the human body or the laser marker may be generating during marking. If your application falls under this description, use a dust collector.
* For more information, contact our office.

Return to top

If you have any questions, please select the option below to contact us or find answers.

Return to top

Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)