Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Measurement Sensors > Measurement Sensors > Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued Products) > Cautions For Use

Ultra High-speed Laser Displacement Sensor HL-C1 (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 30, 2015

Discontinued Products
Information

Specifications

Dimensions

Circuit/ Wiring

Sensing characteristics

Cautions For Use

・ This website is a guide to select a suitable product. Be sure to read instruction manual attached to the product prior to its use.

・	This website is a guide to select a suitable product. Be sure to read instruction manual attached to the product prior to its use.

Never use this product as a sensing device for personnel protection.
In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.

HL-C108□
HL-C105□

・	This product is classified as a Class 2 Laser Product in IEC / JIS standards and a Class II Laser Product in FDA regulations 21 CFR 1040.10. Do not look at the laser beam directly or through optical system such as a lens.
・	The following label is attached to the product. Handle the product according to the instruction given on the warning label.

(The English warning label based on FDA regulations is pasted on the FDA regulations conforming type.)

HL-C135C-BK10

・	This product is classified as a Class 3B Laser Product in IEC / JIS standards and a Class IIIb Laser Product in FDA regulations 21 CFR 1040.10. Never look at or touch the direct laser beam and its reflection.
・	The following label is attached to the product. Handle the product according to the instruction given on the warning label.

(The English warning label based on FDA regulations is pasted on the FDA regulations conforming type.

To comply with the European EMC Directive (HL-C1C-M-WL)

To comply with the European EMC Directive, install a ferrite core on wires to the terminal block as shown below.

Recommended ferrite core:
E04RC281613 manufactured by Seiwa Electric Mfg. Co., Ltd. or equivalent
TFT-152613N manufactured by Takeuchi Industry Co.,Ltd. or equivalent

To comply with the European EMC Directive (HL-C1C-M-WL)

Sensor head mounting direction

To obtain the greatest precision, the sensor head should be oriented facing the direction of movement of the object’s surface, as shown in the figure below.

Rotating object

Object that has large differences in gaps, grooves and colors

Safety standards for laser beam products

A laser beam can harm human being’s eyes, skin, etc., because of its high energy density. IEC and JIS have classified laser products according to the degree of hazard and the stipulated safety requirements.
HL-C108□ and HL-C105□: Classified as Class 2 laser products
HL-C135C-BK10: Classified as a Class 3B laser products

Safe use of laser products

For the purpose of preventing users from suffering injuries by laser products, IEC 60825-1(Safety of laser products). Kindly check the standards before use.

Mutual interference

When installing 2 or more sensor heads side by side, mutual interference will not occur if the laser spots from other sensor heads do not fall within the shaded areas of the sensor head in the figure below. Multiple sensor heads must be installed in a manner such that laser spots from other sensor heads will be prevented from falling within these shaded areas. When two sensor heads are connected to a controller and used, the measures described below are not required since the mutual interference prevention function can be used.