[Announcement of System Maintenance]

Please be informed that Automation Controls Website will be not available during the following period due to system maintenance.
[Date and Time] Sunday, October 21, 0:00-8:00 (GMT)
Kindly note that closing time can change due to unforeseen circumstances. We apologize for any inconvenience this may cause.

AUTOMATION
CONTROLS

Search
Discontinued
Products



FP0R

Option

Wiring tools

Terminal screwdriver
Necessary when wiring relay output type and terminals block (Phoenix).
AFP0806
Molex connector pressure contact tool
Necessary when wiring relay output type and molex connectors.
AFP0805
Multi-wire connector pressure contact tool
Necessary when wiring transistor output type connectors.
AXY52000FP

Parts for mounting

Slim 30 type mounting plate
Screw-stop attachment plate.
30 mm 1.181 inch width type
AFP0811
(set of 10)
Slim type mounting plate
Screw-stop attachment plate. Slim model.
AFP0803
(set of 10)
Flat type mounting plate
Screw-stop attachment plate. Flat model.
AFP0804
(set of 10)

I/O cables

Relay output Molex type I/O cable
Loose-wiring cable (9 leads) with molex socket attached at one end, AWG20, 0.5 mm2, 1 set: 2 cables (blue & white)
Length: 1 m 3.28 ft.
(2 cable set)
AFP0551
Length: 3 m 9.84 ft.
(2 cable set)
AFP0553
Transistor output type I/O
Loose-wiring cable (10 leads) with connectors attached at one end, AWG22, 0.3 mm2, 1 set: 2 cables (blue & white).
Length: 1 m 3.281 ft.
(2 cable set)
AFP0521
Length: 3 m 9.843 ft.
(2 cable set)
AFP0523
*1 One I/O cable set (2 cables) is necessary with the following models: C10RS / C10RM, C14RS / C14RM, E8RS / E8RM, E16RS / E16RM
*2 One I/O cable set (2 cables) is necessary with the following models: C16T / E16X, E16T / E16YT
*3 Two I/O cable sets (total 4 cables) are necessary with the following models: C32T / E32T

Flat cable connector set (10 leads)

Flat cable connector set (10 leads)
If you are using flat cable connector, request the part specified below for a connector with an asymmetrical design to prevent mistaken polarity. (10 pins)
AFP0808
(including 4 pieces)

Maintenance parts

Terminal socket
Attaches to relay output and terminal block types.
AFP0802
(2 sockets per pack)
Molex socket
Attaches to relay output and Molex connector types.
AFP0801
(2 sockets per pack)
Wire-press socket
Attaches to transistor output type.
AFP0807
(2 sockets per pack)
FP0R Power cable
Attaches to FP0R control unit.(Length: 1 m 3.28 ft)
AFPG805
(1 cable per pack)

RT-3 unit relays (Power PhotoMOS relay type)

Contact arrangement Type Rated input
voltage
RT-3 Unit relay
Product No. Part No. Packing quantity
1 Form A x 4 DC only
(equipped with AQZ102)
12 V DC RT3SP1-12V AY34001 Inner carton: 1 piece
Outer case: 20 pieces
24 V DC RT3SP1-24V AY34002
AC / DC dual use
(equipped with AQZ204)
12 V DC RT3SP2-12V AY35001
24 V DC RT3SP2-24V AY35002

Notes 1: Only for use with Power PhotoMOS relays. Cannot be equipped with PA relays.
Notes 2: Please consult us other contact arrangement.

RT-3 unit relays (PA relay type)

Contact
arrangement
Rated input voltage RT-3 Unit relay
Product No. Part No. Packing quantity
1 Form A × 4 12 V DC RT3S-12V AY33001 Inner carton: 1 piece
Outer case: 20 pieces
24 V DC RT3S-24V AY33002

Notes 1: Only for use with PA relay type. Cannot be equipped with Power PhotoMOS relay stndard type. However, equipping with voltage sensitive type is possible.
Notes 2: 5 V DC type relays are also available. Please consult us.
Notes 3: Please consult us other contact arrangement.

4-point terminals

Type Rated input voltage Part No.
PA relay and Voltage sensitive type power PhotoMOS relay type 12, 24 V DC AY30000

PA relay

Power PhotoMOS relay
(voltage sensitive type)

Mountable relays for 4-point terminal

Product name Part No.
PA relay APA3311 and APA3312
Power PhotoMOS relay (voltage sensitive type) AQZ10*D (DC only)
AQZ20*D (AC / DC dual use)

Note : Never mount relays into this product other than those given above.
Doing so will cause malfunction, breakdown, and breakdown of the connected product.

WAGO DIO Station

For Easy and Secure Connection Between FP0R and a Sensor

(2)(3) Cable specifications
AWG28, Rated voltage: 30 V
Outer diameter of sheath: φ 4.4 φ 0.17
Minimum allowable bending radius: R = 13.2
Power supply wire: 0.3 sq, 250 mm 9.84 in

Product name Product number Ident number
(1) Common terminal block PM-PW8-739/3.5 51197832
(2) PM flexible cable for input PM-FP0X-M733SS-F1M 51251907
(3) PM flexible cable for output PM-FP0Y-M733SS-F1M 51251909
(4) 8 ponts, MIL-DIO station PM-M733-3X8PC-S1 51238076

Contact WAGO Kontakttechnik GmbH & Co. KG for inquiries about DIO Station.
URL : http://www.wago.com

Connector terminals

Connector terminals recommended for use with the FP0R

TOYOGIKEN CO., LTD.

PCX-1H20

Connector terminal parts numbers
・PCX-1H20 (angled, spring-lock type, poles: 20P)

PCN7-1H40

 
・PCN7-1H20 (crimping terminal type, poles: 20P)



Cable parts numbers
・Cable for connection to Panasonic Industrial Devices SUNX FP0R (custom-made)
   SA14083-01-*M (Terminal Side 20P⇔PLC side 10Px2, unshielded)
*Cable length (m ft): 0.5 1.640 / 1 3.281 / 1.5 4.921 / 2 6.562 / 3 9.843

To learn more about connector terminals, please contact TOYOGIKEN CO., LTD.
URL:http://www.togi.co.jp/en/

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ

3 year warranty Automation Control Products