AUTOMATION
CONTROLS

Search
Discontinued
Products


Panasonic Home Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Pressure Sensors / Flow Sensors > Pressure Sensors / Flow Sensors > Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100


Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

Thin body controller can do cascade connection and communication with upper devices

Head-separated Dual Display Digital Pressure Sensor DPS-400 / DPH-100
CE Marking

CE Approved

Features

Works like a fiber sensor

DPS-400 series accommodates to the requirements for pressure sensors at production site such as miniaturization of sensors for downsizing equipment, convenient shape to fit into machines, and reduction of man-hours when it comes to replacement.

■Sensor head DPH-100 series

Direct installation using a hexagonal wrench

・Direct mounting from above
・Installation in narrow spaces
・Extended freedom of layout
・Single axis type free turning structure

DPH-100 series Direct installation using a hexagonal wrench

■Controller DPS-400 series

Thin body (t10 mm t0.394 in) and multi-unit connection on a DIN rail helps to downsize equipment for better construction.

DPS-400 series  Thin body (t10 mm t0.394 in)

Current value and threshold value can be checked simultaneously on the dual display

The controller is equipped with a 4-digit dual digital display. Because the threshold value can be adjusted while checking the "current value (current pressure value)", direct setting and checking of the "threshold value" is made smoothly without having to switch screen modes.

Current value and threshold value can be checked simultaneously on the dual display

Wire-saving, space-saving

The quick-connection cables enable reductions in wiring. The connections and man-hours for the relay terminal block setup can be reduced and valuable space is saved. Also, DPS-400 series can be connected side-by-side with fiber sensors FX-300 series or laser sensors LS-400 series.

Wire-saving, space-saving

Network communication

Can connect to Open Network CC-Link IE Field / CC-Link / DeviceNet / EtherCAT via Communication Unit for Open Network SC-GU3 series. Monitoring and various settings can be done from PLC, PC, etc.

Network communication
* CC-Link and CC-Link IE Field are a registered trademark of Mitsubishi Electric Corporation. DeviceNet is a registered trademark of ODVA (Open DeviceNet Vender Association, Inc.). EtherCAT is a registered trademark of Beckhoff Automation GmbH.
* Refer to SC-GU3 series.

Ultra high-speed response time at 150 μs

Ultra high-speed response time contributes to even greater productivity.

Independent dual outputs and five output modes equipped

The sensor is equipped with two independent comparative outputs in which separate sensing modes can be selected.

(1) EASY mode
This mode is used for comparative output ON / OFF control.

(2) Hysteresis mode
This mode is used for setting comparative output hysteresis to the desired level and for carrying out ON / OFF control.

(3) Window comparator mode
This mode is used for setting comparative output ON or OFF at pressures within the setting range.

(4) Forced output ON mode
The comparative outputs are forcibly maintained at ON irrespective of the set values.

(5) Forced output OFF mode
The comparative outputs are forcibly maintained at OFF irrespective of the set values.

Hexagonal wrench installation saves man-hours and spaces [Industry first*]

Using a hexagonal wrench, obstructions can be avoided and installation can be done easily by turning the bolt from above.

Hexagonal wrench installation saves man-hours and spaces [Industry first*]

Quick maintenance

During maintenance, the sensor head needed to be removed can be easily removed from directly above.

Quick maintenance

Mounting shape at 14 mm 0.551 in

Because the dead zone caused by the nut is eliminated, the narrowed-down thickness after installation contributes to space saving.

Mounting shape at 14 mm 0.551 in

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ


Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)