Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Pressure Sensors / Flow Sensors > Pressure Sensors / Flow Sensors > Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100 > Specifications

Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Specifications

Specifications

Controllers

Type		For compound pressure / vacuum pressure	For positive pressure
Model No.		DPS-401	DPS-402
CE marking directive compliance		EMC Directive, RoHS Directive
Applicable sensor head		Compound pressure : DPH-101□ Vacuum pressure : DPH-103□	Positive pressure : DPH-102□
Rated pressure range		Compound pressure: -100.0 to +100.0kPa Vacuum pressure: 0 to -101kPa	Positive pressure: 0 to +1.000MPa
Display / set pressure range		Compound pressure: –199.9 to +199.9 kPa Vacuum pressure: +101.3 to –101.3 kPa	Positive pressure: –1.050 to +1.050 MPa
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption (Note 2)		Normal operation: 650 mW or less (Current consumption 25 mA or less at 24 V supply voltage) ECO mode: 500 mW or less (Current consumption 20 mA or less at 24 V supply voltage)
Sensor head supply voltage		Same as supply voltage
Sensor head input		Input voltage range: 1 to 5 V DC (over rated pressure range)
Comparative outputs (Comparative output 1, 2)		NPN open-collector transistor ・Maximum sink current: 50 mA (Note 3) ・Applied voltage: 30 V DC or less (between comparative output and 0 V) ・Residual voltage: 1.5 V or less (Note 4) [at 50 mA (Note 3) sink current]
	Output operation	NO / NC, selectable by jog switch
	Hysteresis	Minimum 0 digit, variable by hysteresis setting
	Repeatability	With compound pressure type connected: within ±0.2 % F.S. (±4 digits), With vacuum / positive pressure type connected: within ±0.2 % F.S. (±2 digits)
	Response time	150 μs, 500 μs, 1 ms, 5 ms, 10 ms, 50 ms, 100 ms, 500 ms, selectable by jog switch
Ambient temperature		–10 to +50℃ +14 to +122℉ (cascading 8 to 16 controllers: –10 to +45℃ +14 to +133℉) (No dew condensation or icing allowed), Storage: –20 to +70℃ –4 to +158℉
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Temperature characteristics		Over ambient temperature range –10 to +50℃ +14 to +122℉: within ±0.5 % F.S. of pressure at +25℃ +77℉
Material		Enclosure: Heat-resistant ABS, Protective cover: Polycarbonate, Jog switch: ABS, MODE key: Acrylic
Weight		Net weight:20 g approx.

Note 1: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.

Note 2: Excluding current consumption of the applicable pressure sensor head.

Note 3: 25 mA max. if 5 or more controllers are connected together.

Note 4: In case of using the quick-connection cable (cable length: 5 m 16.404 ft)(optional)

Note 5: The cable for controller connection is not supplied as an accessory. Make sure to use the quick-connection cables (optional) given below.
Main cable (4-core): CN-74-C1 (cable length: 1m 3.281 ft), CN-74-C2 (cable length: 2 m 6.562 ft), CN-74-C5 (cable length: 5 m 16.404 ft)
Sub cable (2-core): CN-72-C1 (cable length: 1m 3.281 ft), CN-72-C2 (cable length: 2 m 6.562 ft), CN-72-C5 (cable length: 5 m 16.404 ft)

Note 6: The values specified above are applied only to the controller.

Note 1:	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.
Note 2:	Excluding current consumption of the applicable pressure sensor head.
Note 3:	25 mA max. if 5 or more controllers are connected together.
Note 4:	In case of using the quick-connection cable (cable length: 5 m 16.404 ft)(optional)
Note 5:	The cable for controller connection is not supplied as an accessory. Make sure to use the quick-connection cables (optional) given below. Main cable (4-core): CN-74-C1 (cable length: 1m 3.281 ft), CN-74-C2 (cable length: 2 m 6.562 ft), CN-74-C5 (cable length: 5 m 16.404 ft) Sub cable (2-core): CN-72-C1 (cable length: 1m 3.281 ft), CN-72-C2 (cable length: 2 m 6.562 ft), CN-72-C5 (cable length: 5 m 16.404 ft)
Note 6:	The values specified above are applied only to the controller.

Sensor heads

Type		Compound pressure			Positive pressure		Vacuum pressure
Type		±100 kPa type			1 MPa type		–101 kPa type
Model No. (Note 3)		DPH-101(-R)	DPH-101-M3(-R)	DPH-101-M5(-R)	DPH-102	DPH-102-M5(-R)	DPH-103(-R)	DPH-103-M3(-R)	DPH-103-M5(-R)
CE marking directive compliance		EMC Directive, RoHS Directive
Type of pressure		Gauge pressure
Rated pressure range		–100.0 to +100.0 kPa			0 to +1.000 MPa		0 to –101.0 kPa
Pressure withstandability		500kPa			1.5MPa		500kPa
Applicable fluid		Air, non-corrosive gas
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		15 mA or less
Ambient temperature		0 to +50℃ +32 to +122℉ (No dew condensation allowed), Storage: –10 to +60℃ +14 to +140℉
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Temperature characteristics		Over ambient temperature range 0 to +50℃ +32 to +122℉: within ±2 % F.S. of detected pressure at +25℃ +77℉
Material		Front case: PBT, Rear case: PBT (glass fiber reinforced), Pressure port: Stainless steel (SUS303), O-ring: NBR Pressure element: Silicon diaphragm, PPS
Cable		0.2 mm² 4-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable)
Cable extension		Extension up to total 10 m 32.808 ft is possible with 0.2 mm², or more, cable.
Weight	Net weight	DPH-10□(-R): Head 10 g approx. / Cable 40 g approx., DPH-10□-M3/M5(-R): Head 6 g approx. / Cable 40 g approx.
Weight	Gross weight	DPH-10□(-R): 80 g approx., DPH-10□-M3/M5(-R): 70 g approx.
Accessory		Connector (e-CON): 1 pc. (Note 4)

Note 1: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +25℃ +77℉.

Note 2: The sensor head can be used independently.

Note 3: Model No. having the suffix "-R" is bending-resistant cable type. The bending-resistant cable type of DPH-102 is not available.

Note 4: Connectors (e-CON) are available as spare parts. CN-EP2: 5 pcs.

Note 1:	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +25℃ +77℉.
Note 2:	The sensor head can be used independently.
Note 3:	Model No. having the suffix "-R" is bending-resistant cable type. The bending-resistant cable type of DPH-102 is not available.
Note 4:	Connectors (e-CON) are available as spare parts. CN-EP2: 5 pcs.