AUTOMATION
CONTROLS

Search
Discontinued
Products



Universal Sensor Mounting Stand MS-AJ

Cautions For Use

Cautions For Use

Mounting

  • To mount the universal sensor mounting stand on your equipment, use M6 screws. The tightening torque should be 2.0 Nm or less.

Mounting on horizontal plane , Mounting on vertical plane

Adjustment

  • Arm, attachment, base and arm joint can be adjusted as shown by the arrows in the right figure by loosening the M4 hexagonsocket-head bolts.
  • After the adjustment, the tightening torque of the M4 hexagon-socket-head bolts should be 1.2 Nm or less.
Adjustment

Threading cable into pipe

  • When the sensor is mounted on MS-AJ□ (basic assembly) or on MS-AJ□-A (lateral arm assembly), the sensor cable can be threaded through the pipe. However, do not thread the fiber cable through the pipe when a fiber head is mounted on MS-AJ□-F (assembly for fiber).

Others

  • Do not apply excessive force on any part of the universal sensor mounting stand.
  • When using this stand, take care that excessive vibration is not applied to the sensor.

Return to top

Cautions For Use
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)