Manually Set Fiber Sensor FX-311

Order guide

Order guide

Quick-connection cable is not supplied with the amplifier. Please order it separately.

Manually set

Type	Model No.	Emitting element	Output
NPN output	FX-311	Red LED	NPN open-collector transistor
	FX-311B	Blue LED
	FX-311G	Green LED
PNP output	FX-311P	Red LED	PNP open-collector transistor
	FX-311BP	Blue LED
	FX-311GP	Green LED

Quick-connection cable is not supplied with the amplifier. Please order it separately.

Type	Model No.	Description
Main cable (3-core)	CN-73-C1	Length: 1 m 3.281 ft	0.2 mm² 3-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in
	CN-73-C2	Length: 2 m 6.562 ft
	CN-73-C5	Length: 5 m 16.404 ft
Sub cable (1-core)	CN-71-C1	Length: 1 m 3.281 ft	0.2 mm² 1-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in
	CN-71-C2	Length: 2 m 6.562 ft
	CN-71-C5	Length: 5 m 16.404 ft

(Note):	The material of Quick-connection cable will be changed from production in March 2013, as soon as the previous ones are shipped out. ・Conductor cross-sectional area has been changed from 0.15mm² to 0.2mm². ・Sheath diameter has been changed from ø3.0mm to ø3.3mm.

CN-73-C□

CN-71-C□

End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.

Appearance	Model No.	Description
	MS-DIN-E	When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. [Two pcs. per set]