Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Communication Unit for Open Network SC-GU3 > Software

Communication Unit for Open Network SC-GU3

Partly Order Discontinued
Communication unit for DeviceNet SC-GU3-02

	September 30, 2024

Software

Software

SC-PC1
Sample program for the SC-GU3-01 Communication Unit for CC-Link
Sample program for the SC-GU3-02 Communication Unit for DeviceNet

Computer software for SC-GU3-01 with support for Mitsubishi Electric’s EZSocket SC-PC1

The SC-PC1 computer-based configuration application software supports ladderless manipulation of information (including sensor information) for SC-GU3-01 units connected to CC-Link via the MELSEC series.
(Note) Operations performed with the SC-PC1 application cause communication commands to be sent and received.

List of connected devices
A list of slave devices can be acquired.
(Note) The number of stations made by other manufacturers is also displayed.

List of information about connected sensors
You can browse basic information for sensors connected to the SC-GU3-01. Settings can be changed.

Two types of graph
Browse change data for individual devices with the bar graph display or history and trend data with the log graph display.

A traceability solution for sensor settings

The SC-PC1 application can load sensor setting data.
(Note) Loaded values can be saved as a CSV file.
Additionally, connected sensors can be checked against settings in the application.

This capability is useful when you wish to save settings at the time a device is shipped or check sensor settings as part of the troubleshooting process.

Easy configuration of all connected sensors SC-GU3-01 / SC-GU3-02 / SC-GU3-03 / SC-GU3-04

Not only monitoring current values such as "incident light intensity" and "pressure values" of the digital sensor but also writing sensor setting changes can be performed over the open network.

Program development is simplified by downloading sample programs (screens and ladders) including methods for checking basic threshold and display values as well as basic settings for sensor amplifiers. The sample program's display language can be switched between English and Japanese.
Note:Communications commands are available that enable to check current values and sensor settings also to change settings using CC-Link IE Field / CC-Link / DeviceNet.

Sample program for the SC-GU3-01 Communication Unit for CC-Link

Display	Sequencer	Free downloads
GOT1000 series (Mitsubishi Electric Corporation)	MELSEC-Q series (Mitsubishi Electric Corporation)	Available for download from the Mitsubishi Electric and　Panasonic Industrial Devices SUNX websites *Amplifier-separated Type Digital Laser Sensor LS-500 will be compatible soon.
GOT2000 series (Mitsubishi Electric Corporation)	iQ-R series (Mitsubishi Electric Corporation)	Available for download from our website

Sample program for the SC-GU3-02 Communication Unit for DeviceNet

Display	Programmable controller	Free downloads
NS8 (Omron Corporation)	CJ1 / CS1 series (Omron Corporation)	Available for download from the Panasonic Industrial Devices SUNX website *Amplifier-separated Type Digital Laser Sensor LS-500 will be compatible soon.