Compact Photoelectric Sensor CX-400 Ver.2
Partly Order Discontinued
|
|
Dimensions
CX-41□
Sensor
 |
Notes:
1) Not incorporated on the emitter and the basic type sensor.
2) It is the power indicator (green) on the emitter.
3) Not incorporated on the emitter.
4) Basic type: 0.5 m 1.640 ft long |
|
CX-41□-Z
Sensor
 |
Notes:
1) Not incorporated on the emitter.
2) It is the power indicator (green) on the emitter. |
|
CX-41□-J
Sensor
 |
Notes:
1) Not incorporated on the emitter.
2) It is the power indicator (green) on the emitter. |
|
CX-49□
CX-48□
CX-42□
Sensor
 |
Notes:
1) Not incorporated on the Basic type sensors.
2) Basic type: 0.5 m 1.640 ft long |
|
CX-49□-Z
CX-48□-Z
CX-42□-Z
CX-49□-J
CX-48□-J
CX-42□-J
CX-44□
CX-44□-Z
RF-230
Reflector (Accessory for the retroreflective type sensor)
 |
| Material: Acrylic (Reflector), ABS (Base) |
|
RF-220
Reflector (Optional)
 |
| Material: Acrylic (Reflector), ABS (Base) |
|
RF-210
Reflector (Optional)
 |
Material: Acrylic (Reflector), ABS (Base)
Two M3 (length 8 mm 0.315 in)
screws with washers and two nuts are attached. |
|
Return to top
RF-11
Reflective tape (Optional)
 |
| Material: Flexible Polyvinyl Chloride |
|
RF-12
Reflective tape (Optional)
 |
| Material: Flexible polyvinyl chloride |
|
RF-13
MS-CX2-1
Sensor mounting bracket (Optional)
 |
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached. |
|
Assembly dimensions
Mounting drawing with the receiver of CX-41□ |
 |
|
MS-CX2-2
Sensor mounting bracket (Optional)
 |
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached. |
|
Assembly dimensions
Mounting drawing with the receiver of CX-41□ |
 |
|
MS-CX2-4
Sensor mounting bracket (Optional)
 |
Material: Stainless steel (SUS304)
Two M3 (length 14 mm 0.551 in) screws with washers are attached. |
|
Assembly dimensions
Mounting drawing with the receiver of CX-41□ |
 |
|
MS-CX2-5
Sensor mounting bracket (Optional)
 |
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached. |
|
Assembly dimensions
Mounting drawing with the receiver of CX-41□ |
 |
|
MS-CX-3
Sensor mounting bracket (Optional)
 |
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached. |
|
Assembly dimensions
Mounting drawing with the receiver of CX-41□ |
 |
|
Return to top
MS-RF21-1
Reflector mounting bracket for RF-210 (Optional)
 |
Material: Stainless steel (SUS304)
Two M3 (length 12 mm 0.472 in) screws with washers are attached. |
|
Assembly dimensions |
 |
|
MS-RF22
Reflector mounting bracket for RF-220 (Optional)
 |
Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)
Two M3 (length 8 mm 0.315 in) screws with washers are attached. |
|
Assembly dimensions |
 |
|
MS-RF23
Reflector mounting bracket for RF-230 (Optional)
 |
Material: Cold rolled carbon steel (SPCC), (Uni-chrome plated)
Two M4 (length 10 mm 0.394 in) screws with washers are attached. |
|
Assembly dimensions |
 |
|
Return to top
MS-AJ1
Universal sensor mounting stand (Optional)
 |
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Note: The dimensions in the brackets indicate the adjustable range of the movable part. |
|
Assembly dimensions with CX-400 series (Mounting part only) |
 |
|
MS-AJ2
Universal sensor mounting stand (Optional)
 |
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Note: The dimensions in the brackets indicate the adjustable range of the movable part. |
|
Assembly dimensions with RF-210 (Reflector) (Mounting part only) |
 |
|
MS-AJ1-A
Universal sensor mounting stand (Optional)
 |
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Notes:
1) The dimensions in the brackets indicate the adjustable range of the movable part.
2) Refer to MS-AJ1 / MS-AJ2 for the assembly dimensions with the sensor mounting bracket, sensor or reflector.
|
|
MS-AJ2-A
Universal sensor mounting stand (Optional)
 |
Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.
Notes:
1) The dimensions in the brackets indicate the adjustable range of the movable part.
2) Refer to MS-AJ1 / MS-AJ2 for the assembly dimensions with the sensor mounting bracket, sensor or reflector. |
|
MS-AJ1-M
Universal sensor mounting stand (Optional)
 |
| Note: The dimensions in the brackets indicate the adjustable range of the movable part. |
|
Assembly dimensions with RF-220 (Reflector) (Mounting part only) |
 |
|
MS-AJ2-M
Universal sensor mounting stand (Optional)
 |
Two M3 (length 8 mm 0.315 in) screws with washers and two M4 (length 8 mm 0.315 in) screws with washers are attached.
Note: The dimensions in the brackets indicate the adjustable range of the movable part. |
|
Assembly dimensions with RF-230 (Reflector) (Mounting part only) |
 |
|
Return to top
Return to top
Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Photoelectric Sensors / Laser Sensors
> Compact Photoelectric Sensor CX-400 Ver.2
> Dimensions
