Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Light Curtains / Safety Components > Safety Light Curtain Type 4 SF4B Ver.2 > Option
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
[Note]
The following applicable products and options are available continuously.
Designation | Appearance | Model No. | Application cable | Description | |
---|---|---|---|---|---|
Connector connection type control unit |
SF-C11 | Bottom cap cable : SFB-CB□ Extension cable : SFB-CCJ□ |
Use 8-core cable with connector to connect to the safety light curtain. Compatible with up to Control Category 4. Interference prevention wires and muting function cannot be used. |
||
Slim type control unit |
SF-C13 | Bottom cap cable : SFB-CCB□(-MU) Extension cable : SFB-CC□(-MU) |
Use a discrete wire cable to connect to the safety light curtain. Compatible with up to Control Category 4. Interference prevention wires and muting function can be used. |
Note : | Refer to "Exclusive Control Unit for Safety Light Curtain SF-C10 " for details of the exclusive control units. |
---|
SF relay, slim type
SF series
|
Type | With LED indicator | |
---|---|---|
Model No. | SFS3-L-DC24V | SFS4-L-DC24V |
Part No. | AG1S132 | AG1S142 |
Contact arrangement | 3a1b | 4a2b |
Rated nominal switching capacity | 6A/250V AC、6A/30V DC | |
Min. switching capacity | 1mA/5V DC | |
Coil rating | 15mA/24V DC | 20.8mA/24V DC |
Rated power consumption | 360mW | 500mW |
Operation time | 20ms or less | |
Release time | 20ms or less | |
Ambient temperature | -40 to +85 ℃ -40 to + 185 ℉ (Humidity: 5 to 85 % RH) |
|
Applicable certifications | UL/c-UL, TÜV, Korea S-mark |
Note : | A handy-controller cannot be used with the SF4B-□-01<V2> and the SF-C14EX-01. |
---|
|
|
Simply input the error number of the safety light curtain on the screen, and the section of maintenance needed will be located and coping process will be displayed. |
Type | Appearance | Model No. | Description | |
---|---|---|---|---|
Wire-saving Y-shaped connector |
SFB-WY1 (Note) |
Wire-saving connector for standard components (8-core cable). Cables of emitter and receiver are consolidated into one cable for wire-saving. Wiring has +24 V, 0 V, OSSD 1, OSSD 2, output polarity setting wire (shield). Net weight: 35 g approx. [Power wire and synchronization wire are connected inside the connector. Interlock is disabled (automatic reset).] |
||
Cable with connector on one side |
WY1-CCN3 (Note) |
Cable length: 3 m 9.843 ft Net weight: 200 g approx. (1 cable) |
Mating cable for Y-shaped connector Cable color: Gray (with black line) Connector color: Black The min. bending radius: R6 mm R0.236 in |
|
WY1-CCN10 (Note) |
Cable length: 10 m 32.808 ft Net weight: 620 g approx. (1 cable) |
Note : | Not compatible with SF4B-□-01<V2>. |
---|
|
Designation | Corner mirror | |||
---|---|---|---|---|
Applicable beam channels | Model No. | Effective refl ective surface | ||
Finger | Hand | Arm / Foot | ||
23 | 12 | 6 | RF-SFBH-12 | 236 x 72mm 9.291 x 2.835 in |
31 | 16 | 8 | RF-SFBH-16 | 316 x 72mm 12.441 x 2.835 in |
39 | 20 | 10 | RF-SFBH-20 | 396 x 72mm 15.591 x 2.835 in |
47 | 24 | 12 | RF-SFBH-24 | 476 x 72mm 18.740 x 2.835 in |
55 | 28 | 14 | RF-SFBH-28 | 556 x 72mm 21.890 x 2.835 in |
63 | 32 | 16 | RF-SFBH-32 | 636 x 72mm 25.039 x 2.835 in |
71 | 36 | 18 | RF-SFBH-36 | 716 x 72mm 28.189 x 2.835 in |
79 | 40 | 20 | RF-SFBH-40 | 796 x 72mm 31.339 x 2.835 in |
95 | 48 | 24 | RF-SFBH-48 | 956 x 72mm 37.638 x 2.835 in |
111 | 56 | 28 | RF-SFBH-56 | 1,116 x 72mm 43.937 x 2.835 in |
127 | 64 | 32 | RF-SFBH-64 | 1,276 x 72mm 50.236 x 2.835 in |
- | 72 | 36 | RF-SFBH-72 | 1,436 x 72mm 56.535 x 2.835 in |
- | 80 | 40 | RF-SFBH-80 | 1,596 x 72mm 62.835 x 2.835 in |
- | 88 | 44 | RF-SFBH-88 | 1,756 x 72mm 69.134 x 2.835 in |
- | 96 | 48 | RF-SFBH-96 | 1,916 x 72mm 75.433 x 2.835 in |
RF-SFBH-□
|
Operating range
With 1 mirror | Declined to 90 % |
---|---|
With 2 mirrors | Declined to 80 % |
Designation | Model No. | Description |
---|---|---|
Large display unit for safety light curtain |
SF-IND-2 | With the auxiliary output of the safety light curtain, the operation is easily observable from various directions. Specifi cations ・Supply voltage: 24 V DC ±15 % ・Current consumption: 12 mA or less ・Indicators: Orange LED (8 pcs. used)[Light up when external contact is ON] ・Ambient temperature: –10 to +55 ℃ +14 to +131℉(No dew condensation or icing allowed) ・Material: POM (Enclosure), Polycarbonate (Cover), Cold rolled carbon steel (SPCC) (Bracket) ・Cable: 0.3mm2 2-core cabtyre cable, 3m 9.843 ft long ・Weight: 70 g approx. (including bracket) I/O circuit diagrams <With NPN output type> <With PNP output type> |
Designation | Model No. | Description |
---|---|---|
Test rod ø45 | SF4B-TR45 | Min. sensing object for regular checking (ø45 mm ø1.772 in), with arm / foot protection type (min. sensing object ø45 mm ø1.772 in) |
Laser alignment tool (Excluding SF4B-□G□<V2>) |
SF-LAT-2N | Allows easy beam axis alignment using easy-to-see laser beam |
|
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)