Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Wire-Saving Systems > Communication Unit for CC-Link IE Field / CC-Link > Order guide

Communication Unit for CC-Link IE Field / CC-Link

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Order guide

Order guide

SC-GU3-□

Example of system configuration

When optical communication is used in a system connected with product models not compatible with optical communication, connect the incompatible units after the SC-GU3-EU.
A maximum of 12 units can be connected if the system is connected with a FX-500 series unit or LS-501.
A maximum of 16 sensor amplifiers can be connected.

Communication units

Designation	Appearance	Model No.	Descritption
Communication unit for CC-Link IE Field		SC-GU3-04	This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for CC-Link IE Field.
Communication unit for CC-Link		SC-GU3-01	This is a communication unit, which can convert the output signal of a sensor amplifier into communication data for CC-Link.

Others

Designation	Model No.	Descritption
End unit	SC-GU3-EU	This end unit can change and check the settings of sensor amplifiers that allow optical communication and monitor operation status.
Cascading connector unit	SC-71	This one-touch connector is used to connect the following devices to SC-GU3-0□: The FX-500/410/310/300 fiber sensor, the LS-500/400 laser sensor, the DPS-400 digital pressure sensor, SC-E1, SC-A01 and SC-A02, etc.
e-CON 1-channel connector input extension unit	SC-E1	This extension unit can be connected to commercially available devices (Note) including an NPN output type or DC 2-wire type sensor. Includes power and input signal indicators (for one channel). When using in combination with the SC-GU3 series, use with the SC-71.
e-CON 8-channel connector input extension unit	SC-E81	This extension unit can be connected to eight NPN output type devices. Includes power and input signal indicators (for eight channels).
e-CON 8-channel connector input extension unit	SC-E82	This extension unit can be connected to eight NPN output type devices. Includes a power indicator. (Does not include an input signal indicator)
Analog voltage input unit	SC-A01	This extension unit can be connected to NPN output type devices or analog voltage output type devices. When using in combination with the SC-GU3 series, use with the SC-71.
Analog current input unit	SC-A02	This extension unit can be connected to NPN output type devices or analog voltage output type devices. When using in combination with the SC-GU3 series, use with the SC-71.
End plate	MS-DIN-E	After SC-GU3-0□, a sensor amplifier, an analog input unit or an end unit are connected on a DIN rail, make sure to install the end plates in such a way that they hold the unit in place at both ends. [Two pcs. per set]

Note:	Conditions of connectable DC 2-wire type input device ・Leak current: 1 mA or less (when the power is OFF), Offset voltage: 3 V or less (when the power is ON) ・Product whose load current range includes 5 to 8 mA

SC-HG1-□

Example of system configuration

Designation	Model No.	Description
CC-Link IE Field communication unit for digital displacement sensor	SC-HG1-CEF	This communication unit converts the output data from digital displacement sensors to data that can be communicated via CC-Link IE Field.
CC-Link communication unit for digital displacement sensor	SC-HG1-C	This communication unit converts the output data from digital displacement sensors to data that can be communicated via CC-Link.
End plate	MS-DIN-E	After a communication unit and controllers are connected on a DIN rail, make sure to install the end plates in such a way that they hold the unit in place at both ends. [Two pcs. per set]