Bench Top Ionizer Cleaning Box EC-B

Cautions For Use

Never use this product in a device for personnel protection.
In case of using devices for personnel protection, use products which meet laws or standards, such as OSHA,
ANSI or IEC etc., for personnel protection applicable in each region or country.
Do not use this product in places where there may be a danger of flammable or combustible items being present.
When carrying, hold the bottom of the main unit from both sides. Do not hold the transparent antistatic cover or damage may occur.
High voltages are applied to the discharge needle, so never touch the discharge needle while the power for the product is turned on, otherwise electric shocks may result.
Be sure to ground the main body of this product via ground terminal to ensure electric shock prevention and reliable charge removal.
Since the tip of the discharge needle is pointed, take sufficient care in handling the discharge needle, or injuries may result.
The cut edges of the protective mesh are sharp, so be very careful when handling the mesh, otherwise injury may occur.
Turn off the power and air before carrying out any maintenance or cleaning.
Make sure that the supply of air has been fully shut off and that all pressures at the product and inside the tubes are at zero before continuing. If this is not done, air pressure may cause operating problems or accidents.

This product detects the air supply status.
If air is not being supplied to the product, or if the pressure of air being supplied is 0.6 MPa or higher, the product will treat this as an error condition, and dust removal operation will not be carried out when an object (electrostatically-charged object) is inserted.
Do not change the pressure sensor settings. If the settings are changed, this product may cease to operate correctly.

Cautions For Use

If you have any questions, please select the option below to contact us or find answers.