AUTOMATION
CONTROLS

Search
Discontinued
Products



Pulse Air-gun Ionizer EC-G

Specifications

Specifications

Type Gun type
Model No. EC-G02
Charge removal time 0.5 sec. approx. or less (±1,000 V → ±100 V) (Note 2)
Applicable fluid Air (dried clean air) (Note 3)
Supplied air flow 300 ℓ/min. (ANR) or less
Air pressure range 0.05 to 0.50 MPa
Supply voltage Accessory AC adapter INPUT: 100-240 V AC ±10 % 50/60 Hz
(OUTPUT: 24 V DC)
Power consumption 30 VA or less
Discharge method High-frequency AC method
Pulse air mode Pulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switch
LED illumination mode ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF)
External input Ionized air emission operation ON / OFF using OR control with trigger switch
Ionized air emission operation ON: Short-circuited to COM (-)
Ionized air emission operation OFF: Open
Ambient temperature 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), AC adapter: 0 to +40 ℃ +32 to +104 ℉
Ambient humidity 35 to 65 % RH (No dew condensation allowed)
Weight 270 g approx. (main unit only)
Accessories AC adapter: 1pc.
Exclusive intermediate cable (oil-resistant, heat-resistant, bending-resistant type) length 2m 6.562 ft: 1 pc.
Straight joints
・Tube outer diameter ø8-ø8mm ø0.315-ø0.315 in compatible type: 1 pc. (Note 4)
・Tube outer diameter ø8-ø6mm ø0.315-ø0.236 in compatible type: 1 pc.
Connector connection terminal (Manufactured by Molex): 3 pcs.

Notes:

1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
2) Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa.
3) Dried clean air is the air passing through air dryer (dew point -20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.)
4) At the time of shipment from the factory, ø8-ø8mm ø0.315-ø0.315 in type is attached.

Type Gun type
Model No. EC-G01
Charge removal time
(±1,000 V → ±100 V)		 Approx. 0.5 sec. or less (Note 1)
Applicable fluid Air (dried clean air) (Note 2)
Supplied air flow Max. 300 ℓ/min. (ANR) or less
Air pressure range 0.05 to 0.50 MPa
Power supply voltage Accessory AC adapter INPUT: 100 to 240 V AC ±10 % 50/60 Hz
(OUTPUT: 24 V DC)
Power consumption 30 VA or less
Discharge method High-frequency AC-method
Pulse air mode Pulse 1 (long) / Pulse 2 (short) / CONT (continuous) selectable by switch
LED illumination mode ON (always ON) / SYNC (synchronized with trigger) / OFF (always OFF)
Weight 270 g approx. (main unit only)

Notes:

1) Typical value for pulse air mode: CONT at 100 mm 3.937 in from the front of discharge nozzle at an applied air pressure of 0.50 MPa.
2) Dried clean air is the air passing through air dryer (dew point –20 ℃ -4 ℉ approx.) and air filter (mesh size 0.01 μm 0.0004 mil approx.)

Return to top

Specifications
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)