AUTOMATION
CONTROLS

Search
Discontinued
Products



A210/A110 MultiChecker V2 Series (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

Last time buy March 31, 2015
 
Specifications

Specifications

Item A210 MultiChecker V2 A110 MultiChecker V2
CPU 32-bit RISC CPU
(high-speed processing version)		 32bit RISC CPU
Frame memory 512 × 480 (pixels) × 256 gradations
Operator interface Menu selection by specialized keypad
Menu selection using the key emulation function (ver. 2.2 or later).
Monitor display Change between Gray-scale memory, Gray-scale through,
Binary memory (A/B/C/D/E/F), Binary through (A/B/C/D/E/F),
Gray-scale NG, Binary NG (A/B/C/D/E/F)
Processing Gray-scale 8-bit 256 gradations
Binarization 6 groups of binary processing from the gray-scale memory
(upper and lower threshold settings)
Number of product types 64 32
Execution modes Execute all mode: Execute all set checkers
Automatic switch mode: Change the checker to be executed in
accordance with the judgment output result
User-defined mode: Specify the checker for execution
when the start signal is input
Inspection
function		 Position and Rotation
position adjustment
function
(per product type)		 Max. 96
Rotation position adjustment function		 Max. 48
X-Y position adjustment function
Priority adjustment function, Multi-stage adjustment function, Sequence setting by matching, gray-scale edge, binary edge or feature extraction detection position
Exposure
adjustment
(per product type)		 Max. 96 Max. 48
Shape: Rectangular, Slice level adjustment according to changes in the gray-scale data, Gray-scale average value detection and judgement
Smart matching
and matching
(sub-pixel
processing)		 Smart matching: Max. 96 per
product type
Equipped with post-detection
differential processing function		 Matching: Max. 48 per product
type
Sub-pixel accurate multiple detection matching by gray-scale correlation processing
Rotation by raster detection and raster detection position (ｱ30 degrees)
Output: Number of detected items, Correlation numbers, Position, Angle
Teaching registered changes can be imported from external source
Smart matching (A210): Judgement learning function by the smart template
Gray-scale edge
detection
(sub-pixel processing)		 Max. 96 per product type Max. 48 per product type
Scanning method: Single/Projection, Gray-scale Filter/Width function, Detection by sub-pixel unit Detection position: Start point/Start and End points/Largest differential/Multiple edge
Gray-scale window
(per product type)		 Max. 96 Max. 48
Shape: Rectangular/Polygonal/Oval, Mask Shape: Rectangular/Polygonal/Oval, Gray-scale average value detection and judgement
Feature extraction
(per product type)		 Max. 96 Max. 48
Shape: Rectangular/Polygonal/Oval, Mask shape: Rectangular/Polygonal/Oval, Image filtering, Labeling,
Output values: Counter/Center of gravity (to one decimal place) /Area/Projection width/Principle axis angle
Binary window
(per product type)		 Max. 96 Max. 48
Shape: Rectangular/Polygonal/Oval, Mask shape: Rectangular/Polygonal/Oval, Image filtering, White/Black pixel dot count and judgement
Binary edge detection
(per product type)		 Max. 96 Max. 48
Shape: Line/Plane, Filter/Width function, Start point edge detection
Line
( per product type)		 Max. 96 Max. 48
Shape: Straight line/Polygonal line/Circle/Arc, Image filtering, White/Black pixel dot/land count and judgement
Conversion data 4 registers, Can quote to numerical calculation, Can convert numerical calculation result to actual distance,
Base distance, Base pixel, Coefficient
Numerical
calculations
(per product type)		 Max. 96 Max. 48
Sine, Cosine, Absolute differential, Projection distance,
Arithmetic calculations
(addition, subtraction, multiplication and division),
Arctangent, Root, Distance between points,
Specific substitution,
Referencing of previous data,
Output control
Judgement output External output register (D):
Max. 96 per product type
Internal output register (R):
Max. 96 per product type		 External output register (D):
Max. 48 per product type
Internal output register (R):
Max. 48 per product type
External
interface		 Serial RS232C: 2ch (max.115200bps)
Compatible with Panasonic Industrial Devices SUNX PLC FP series,
Mitsubishi MELSEC A Series/FX Series, Omron C series,
and Allen-Bradley SLC 500 series (Ver 2.2 or later)
Parallel Input = 11points, Output = 14 points,
Removable screw-down terminal block
Inspection start Image trigger (timing sensor unnecessary), External sensor timing, Repeat start
Other Display functions Display item suppressing function (menu display hide function),
Display image brightness modification,
Image suppress function when setting checkers,
Image rotation function when setting checkers (A210),
Bright display of reject location,
Rotational adjustment angle display (A210),
Data monitor function,
Display of image processed with image filter, Spreadsheet,
Display list of checkers
Marker function Maximum of 8 graphics per product type,
Shape: Straight line/Rectangle/Circle,
Registered graphics are displayed on the main screen
Setup
support tools		 Image storage
function		 30 screens 8 screens
Save/load function for inspection image (all screens/problem screens), Store images for reinspection/resetting,
Windows-PC image save/load function
Debugging Trap function, Image storage function
Setup help Focus setup, Aperture setup, Lighting adjustment, Gray-scale profile monitor, Recommended slice level display,
Input monitor, Forced output function
Moving object inspection Double-speed random camera (progressive), Flash, Electronic shutter used
Camera support High-speed random camera (progressive): ANM831, Standard camera: ANM832,
Composite video (NTSC) input used (however the connection requires one port)
Number of support cameras 2 1
Operating voltage 24 V DC less than 0.9 A 24 V DC less than 0.7 A
Setup data backup Image data and setup data can be saved to a Windows PC using Vision Backup Tool Ver. 2

* Type data saved in the previous controller of the MICRO-IMAGECHECKER A Series (Ver. 1) cannot be directly restored to V2 using the Vision Backup-Tool. In this case, you will need the dedicated data conversion software (freeware) to convert the Ver. 1 type data for V2 use. If you require the data conversion software or information about how to use it, please contact your dealer.

Return to top

Specifications
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)