AUTOMATION
CONTROLS

Search
Discontinued
Products


Panasonic Home Business > Industrial Devices > Automation Controls Top > FP7 Add-on cassettes > AFP7CCRS1M1


NewAFP7CCRS1M1 | FP7 Add-on cassettes

  • Print This Page

FP7 Add-on cassettes

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU. 　


Product Number AFP7CCRS1M1
Part Number AFP7CCRS1M1
Product FP7 Add-on Cassettes
Details Communication Cassettes
Product name FP7 Add-on cassettes

As of April 18, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number AFP7CCRS1M1
Part Number AFP7CCRS1M1

SPECIFICATIONS

Item Specifications
Interface RS-232C 1 channel and RS-485 1 channel
Transmission distance RS-232C Max. 15 m 49.213 ft (Note 1), RS-485 Max. 1,200 m 3,937 ft (Note 2)
(Note 1) Cable length should be no longer than 3 m 9.843 ft if communicating at a rate of 38.4 kbits/sec. or higher. If you are using RS-232C wiring, shielded cable should be used to improve noise immunity.
(Note 2) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec.
Transmission speed 300,600,1200,2400,4800,9600,19200,38400,57600,115200, 230400 bits/sec.
Communication method Half-duplex system
Synchronous method Start-stop synchronization system
Transmission format Stop bit: 1 bit / 2 bits
Parity: Invalid / Valid (Odd / Even)
Data length: 7 bits / 8 bits
Start code: with STX / without STX
End code: CR / CR + LF / None / ETX
Data transmission order Transmit from bit 0 in character units.
Number of connected units (Transmission distance: RS-232C)
-
(Transmission distance: RS-485)
For general-purpose communication: Max. 99 units
For computer link: Max. 99 units
For PLC link: Max. 16 units
For MODBUS-RTU: Max. 99 units
(Note) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec.
(Note) The converter SI-35 manufactured by LINE EYE Co., Ltd. is recommendable for the RS-485 at the computer side. When you use the SI-35, please adjust time after FP7 series PLC receives a command until it returns a response by a program.

COMMON GENERAL SPECIFICATIONS

Item Specifications
Ambient temperature 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

Item Specifications
Rated voltage range -
Current consumption 35 mA or less
(Note) Increased CPU unit current consumption
Net weight 25 g approx. (with terminal block)

Return to top

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)