*Photo may vary from actual product.
|Product||FP7 Add-on Cassettes|
|Product name||FP7 Add-on cassettes|
As of December 01, 2022
Specifications and design of the products are subject to change without notice for the product improvement.
|Interface||RS-232C 2 channels|
|Transmission distance||Max. 15 m 49.213 ft
(Note) Cable length should be no longer than 3 m 9.843 ft if communicating at a rate of 38.4 kbits/sec. or hi1gher. If you are using RS-232C wiring, shielded cable should be used to improve noise immunity.
|Transmission speed||300,600,1200,2400,4800,9600,19200,38400,57600,115200, 230400 bits/sec.|
|Communication method||Half-duplex system|
|Synchronous method||Start-stop synchronization system|
|Transmission format||Stop bit: 1 bit / 2 bits
Parity: Invalid / Valid (Odd / Even)
Data length: 7 bits / 8 bits
Start code: with STX / without STX
End code: CR / CR + LF / None / ETX
|Data transmission order||Transmit from bit 0 in character units.|
|Number of connected units||-
(Note) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec.
(Note) The converter SI-35 manufactured by LINE EYE Co., Ltd. is recommendable for the RS-485 at the computer side. When you use the SI-35, please adjust time after FP7 series PLC receives a command until it returns a response by a program.
|Ambient temperature||0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉|
|Ambient humidity||10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)|
|Vibration resistance||5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions|
|Shock resistance||147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)|
|Noise immunity||1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)|
|Operating condition||Free from corrosive gasses and excessive dust|
|Rated voltage range||-|
|Current consumption||60 mA or less
(Note) Increased CPU unit current consumption
|Net weight||25 g approx. (with terminal block)|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)