Business
> Industrial Devices
> Automation Controls Top
> FP7 PHLS (Remote I/O) unit
> AFP7PHLSM
AFP7PHLSM | FP7 PHLS (Remote I/O) unit
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | AFP7PHLSM |
| Part Number | AFP7PHLSM |
| Product | FP7 PHLS (Remote I/O) unit |
| Details | PHLS Master unit |
| Product name | FP7 PHLS (Remote I/O) unit |
As of April 20, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | AFP7PHLSM |
| Part Number | AFP7PHLSM |
COMMUNICATION SPECIFICATIONS (Common)
| Item | Specifications |
|---|---|
| Communication method | Two-wire system half duplex |
| Insulation method | Pulse transformer insulation |
| Communication speed | 6 Mbps / 12 Mbps |
| Synchronous method | Bit synchronization |
| Error check | CRC-12 |
| Communication distance | Total length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps) (Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units. |
| Connection method | Multi-drop method |
| Impedance | 100 Ohm |
| Terminator | Mounted on unit |
| External interface | terminal block (2 channels) |
COMMON GENERAL SPECIFICATIONS
| Item | Specifications |
|---|---|
| Ambient temperature | 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉ |
| Ambient humidity | 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation) |
| Vibration resistance | 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions |
| Shock resistance | 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2) |
| Noise immunity | 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator) |
| Operating condition | Free from corrosive gasses and excessive dust |
INDIVIDUAL GENERAL SPECIFICATIONS
| Item | Specifications |
|---|---|
| Rated voltage range | - |
| Current consumption | 85 mA or less |
| Net weight | 110 g approx. |
Applicable Products
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
