Business
> Industrial Devices
> Automation Controls Top
> FP7 Temperature input units
> AFP7RTD8
AFP7RTD8 | FP7 Temperature input units
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | AFP7RTD8 |
| Part Number | AFP7RTD8 |
| Product | FP7 Temperature input units |
| Product name | FP7 Temperature input units |
As of April 19, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | AFP7RTD8 |
| Part Number | AFP7RTD8 |
| Number of channels | 8 channels |
| Input range(resolution): Resistance temperature detector (resolution: 0.1 ºC) | Pt100 (1): -100.0 to 200.0degrees Pt100 (2): -200.0 to 650.0degrees JPt100 (1): -100.0 to 200.0degrees JPt100 (2): -200.0 to 650.0degrees Pt1000: -100.0 to 100.0degrees |
| Conversion speed | 25 ms/channel + 25 ms Add the drift compensation measuring time to the number of measuring channels. |
| Overall accuracy | plus or minus 0.1%F.S.or less(at +25degrees +77degrees Fahrenheit ) plus or minus 0.3%F.S.or less(at 0 to +55degrees +32 to +131degrees Fahrenheit ) |
| Allowable signal source resistance | R.T.D. input: 30 Ohm (three wires balanced) |
| Insulation method:Between input terminals and internal circuit | Photocoupler and isolated DC/DC converter |
| Insulation method:Between channels | PhotoMOS relay |
| Conversion execution / non-execution channel setting | Selectable per channel unit |
| Input range change method | Selectable per channel |
| Digital processing:Averaging | Cycle, time, moving |
| Digital processing:Offset setting | Any value within plus or minus 3,000 |
| Digital processing:Gain setting | plus or minus 10% |
| Comparison of upper and lower limit values | Selectable for one channel |
| Max. and min. value holding | Selectable for one channel |
| Broken wire detection | Available |
| Connection method | Connector type terminal block |
COMMON GENERAL SPECIFICATIONS
| Item | Specifications |
|---|---|
| Ambient temperature | 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉ |
| Ambient humidity | 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation) |
| Vibration resistance | 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions |
| Shock resistance | 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2) |
| Noise immunity | 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator) |
| Operating condition | Free from corrosive gasses and excessive dust |
INDIVIDUAL GENERAL SPECIFICATIONS
| Item | Specifications |
|---|---|
| Rated voltage range | - |
| Current consumption | 65 mA or less |
| Net weight | 145 g approx. |
| Accessory | - |
Applicable Products
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
