AUTOMATION
CONTROLS

Search
Discontinued
Products


Panasonic Home Business > Industrial Devices > Automation Controls Top > FP7 PHLS (Remote I/O) unit > AFPRP1XY16D2T


AFPRP1XY16D2T | FP7 PHLS (Remote I/O) unit


FP7 PHLS (Remote I/O) unit

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


Product Number AFPRP1XY16D2T
Part Number AFPRP1XY16D2T
Product FP7 PHLS (Remote I/O) unit
Details PHLS Slave units
Product name FP7 PHLS (Remote I/O) unit

As of December 09, 2021
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number AFPRP1XY16D2T
Part Number AFPRP1XY16D2T

COMMUNICATION SPECIFICATIONS (Common)

Item Specifications
Communication method Two-wire system half duplex
Insulation method Pulse transformer insulation
Communication speed 6 Mbps / 12 Mbps
Synchronous method Bit synchronization
Error check CRC-12
Communication distance Total length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps)
(Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units.
Connection method Multi-drop method
Impedance 100 Ohm
Terminator Mounted on unit
External interface Screw-type terminal block

INPUT SIDE SPECIFICATIONS

Item Specifications
Insulation method Photocoupler insulation
Rated input voltage 24 V DC
Rated input current 3 mA approx.
Input impedance 7.5 kOhm approx.
Min. ON voltage / Min. ON current 15 V / 2 mA
Max. OFF voltage / Max. OFF current 5 V / 0.5 mA
Response time:OFF→ON 1 ms or less
Response time:ON→OFF 1 ms or less

OUTPUT SIDE SPECIFICATIONS (Except relay)

Item Specifications
Insulation method Photocoupler insulation
Output type Sink type (Open collector output)
Rated load voltage 20.4 to 28.8 V DC
Max. control capacity 0.1 A/point
Max. surge current 0.5 A
OFF state leakage current 0.1 mA or less
ON state maximum voltage drop 0.5 V or less
Response time:OFF→ON 0.05 ms or less
Response time:ON→OFF 0.5 ms or less
Surge absorber Zener diode
Short circuit protection None

COMMON GENERAL SPECIFICATIONS

Item Specifications
Ambient temperature 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Breakdown voltage 500 V AC for 1 minute
Insulation resistance 100 MOhm or more (at 500 V DC)
Vibration resistance 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition Free from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

Item Specifications
Rated voltage range 20.4 to 28.8 V DC
Current consumption 120 mA or less
Net weight 210 g approx.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)