AUTOMATION
CONTROLS

Search
Discontinued
Products



DP-101ZL3-M-P | Dual Display Digital Pressure Sensor [For Gas] DP-100L


Dual Display Digital Pressure Sensor [For Gas] DP-100L

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


Product Number DP-101ZL3-M-P
Part Number DP-101ZL3-M-P
Product Dual Display Digital Pressure Sensor [For Gas]
Details Discrete wire type
Product name Dual Display Digital Pressure Sensor [For Gas] DP-100L

As of May 23, 2022
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number DP-101ZL3-M-P
Part Number DP-101ZL3-M-P
Regulatory compliance and certification EMC Directive, RoHS Directive, UL/c-UL Certification
Type of pressure Gauge pressure
Rated pressure range −100.0 to +100.0 kPa
Set pressure range -101.0 to +101.0kPa
Pressure withstandability 500kPa
Applicable fluid Non-corrosive gas
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)
360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage)
Communication output (C/Q):IO-Link communication IO-Link Specification V1.1
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Baud rate COM3 (230.4 kbps)
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Process data 4 byte
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Minimum cycle time 1.0ms
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Control output (DO) PNP open-collector transistor
•Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
Control output (DO):Output operation N.O./N.C. (selectable by key operation)
Control output (DO):Output operationOutput modes EASY mode / Hysteresis mode / Window comparator mode
Control output (DO):Hysteresis Minimum 1 digit (variable)
Control output (DO):Repeatability ±0.1 % F.S. (within ±2 digits)
Control output (DO):Response time 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Control output (DO):Short-circuit protection Incorporated
Display 4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Display:Displayable pressure range -101.0 to +101.0 kPa
Output indicator Orange LED(Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON during non-IO-Link communication (synchronized with the output operation indicator 2)
Output operation indicator 2: Lights up when the control output is ON)
Protection IP40(IEC)
Ambient temperature −10 to +50℃ +14 to +122 ℉(No dew condensation or icing allowed), Storage: −10 to +60℃ +14 to +140 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel or flat attachment is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each)
Shock resistance 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Temperature characteristics Within ±0.5 % F.S.
(at +20℃ +68℉)
Pressure port M5 female thread
Material Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber
Connecting method Connector
Cable length Total length up to 20 m 65.617 ft (Condition of CE compliance less than 20 m 65.617 ft) is possible with 0.3 mm2, or more, cable.
Weight Net weight: 30 g approx., Gross weight: 125 g approx.
Accessories CN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1 pc.
Remark (Note:)measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.

Return to top

Accessories (Option)

no_image
Product Number CN-14A
Part Number CN-14A
Product name Connector
no_image
Product Number CN-14A-C1
Part Number CN-14A-C1
Product name Connector-attached cable
no_image
Product Number CN-14A-C2
Part Number CN-14A-C2
Product name Connector-attached cable


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)