EX-Z12A | Ultra-minute Photoelectric Sensor EX-Z

Ultra-minute Photoelectric Sensor EX-Z

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  

Product Number EX-Z12A
Part Number EX-Z12A
Product Ultra-minute Photoelectric Sensor
Details Thru-beam [Side sensing]
Product name Ultra-minute Photoelectric Sensor EX-Z

As of September 22, 2021
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number EX-Z12A
Part Number EX-Z12A
CE marking directive compliance EMC Directive, RoHS Directive
Output operation Light-ON
Sensing range 200 mm 7.874 in
Min. sensing object ø0.5 mm ø0.02 in opaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 200 mm 7.874 in)
Repeatability(perpendicular to sensing axis) 0.03 mm 0.001 in or less
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption Emitter: 10 mA or less
Receiver: 10 mA or less
Output NPN open-collector transistor
- Maximum sink current: 20 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 20 mA sink current)
Output:Short-circuit protection Incorporated
Response time 0.5 ms or less
Operation indicator Orange LED (Lights up when the sensing output is ON)
Stability indicator Green LED (Lights up under the stable light received condition or the stable dark condition)
Protection IP67 (IEC)
Ambient temperature -10 to +55 ℃ 14 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 5,000 ℓx at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting element Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated)
Grounding Floating
Material Enclosure: PBT
Lens: Polycarbonate
Metallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type)
Cable 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Note:The bending-resistant cable type has a 0.1 mm2 3-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m 6.562 ft long.
Cable extension Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver) .
Weight Net weight (each emitter and receiver) : 15 g approx.
Gross weight: 35 g approx.
Accessory M2 mounting screws: 1 set (front sensing type: 6 mm 0.236 in in length; side sensing type: 10 mm 0.394 in in length)
Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ 73 ℉.

Return to top

Accessories (Option)

Product Number MS-EXZ-1
Part Number MS-EXZ-1
Product name Mounting bracket
Product Number MS-EXZ-3
Part Number MS-EXZ-3
Product name Mounting bracket

Return to top

If you have any questions, please select the option below to contact us or find answers.

Return to top

Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)