AUTOMATION
CONTROLS

Search
Discontinued
Products



FX-502P | Digital Fiber Sensor FX-500 Ver.2


Digital Fiber Sensor FX-500 Ver.2

*Photo may vary from actual product.


Product Number FX-502P
Part Number FX-502P
Product Digital Fiber Sensor
Details 2-output type
Product name Digital Fiber Sensor FX-500 Ver.2

As of October 20, 2020
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number FX-502P
Part Number FX-502P
CE marking directive compliance EMC Directive, RoHS Directive
Supply voltage 12 to 24 V DC+10-15 % Ripple P-P 10 % or less
Power consumption Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)
Output 1, Output 2 PNP open-collector transistor
- Maximum source current: 50 mA (Note 1)
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 2 V or less (Note 2) (at maximum source current)
(Note 1) 25 mA max. if 5 or more standard types are connected together.
(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type)
Output 1, Output 2:Output points 2 points
Output 1, Output 2:Output operation Switchable either Light-ON or Dark-ON by L/D mode
Output 1, Output 2:Short-circuit protection Incorporated
Response time H-SP: 25 micro s or less
FAST: 60 micro s or less
STD: 250 micro s or less
LONG: 2 ms or less
U-LG: 4 ms or less
HYPR: 24 ms or less, selectable
External input -
External input(switchable with Output 2) PNP non-contact input
- Signal condition
High: +4 V to +V DC (at 3 mA sink current)
Low: 0 to +0.6 V DC or Open
- Input impedance: 10 kOhm approx.
Possible external input function Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable
Sensitivity setting 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment
Incident light intensity display range H-SP / FAST / STD: 0 to 4,000
LONG: 0 to 8,000
U-LG / HYPR: 0 to 9,999
Timer function Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffective
Incorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective
Timer function:Timer period Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.
Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.
Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.
each output is set individually
Emission amount setting function Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode]
Interference prevention function Incorporated (Note) , selectable either automatic interference prevention or different frequency
(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.
- Number of sensor heads mountable closely (Unit: set)
Response time: IP-1
H-SP: 0
FAST: 2
STD: 4
LONG: 8
U-LG: 8
HYPR: 12
Various settings Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc.
Protection IP40 (IEC)
Ambient temperature -10 to +55 ℉ +14 to +131 ℉ [If 4 to 7 units are mounted in cascade: -10 to +50 ℉ +14 to +122 ℉ or if 8 to 16 units are mounted in cascade: -10 to +45 ℉ +14 to +113 ℉ ] (No dew condensation or icing allowed), Storage: -20 to +70 ℉ -4 to +158 ℉ 
Emitting element (modulated) Red LED (Peak emission wavelength: 643 nm 0.025 mil)
Material Enclosure, Case cover: Polycarbonate
Switch: Polyacetal
Cable -
Cable extension -
Weight Net weight: 15 g approx.
Gross weight: 70 g approx.
Accessory FX-MB1 (Amplifier protection seal): 1 set

Return to top

Accessories (Option)

Cable
Product Number CN-72-C1
Part Number CN-72-C1
Product Quick-connection cables
Details Sub cable(2-core)
Product name Cable
Cable
Product Number CN-72-C2
Part Number CN-72-C2
Product Quick-connection cables
Details Sub cable(2-core)
Product name Cable
Cable
Product Number CN-72-C5
Part Number CN-72-C5
Product Quick-connection cables
Details Sub cable(2-core)
Product name Cable


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)