Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Fiber Sensors
> Bank Selection Unit FX-CH
> Part Number
> FX-CH-P
FX-CH-P | Bank Selection Unit FX-CH
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | FX-CH-P |
| Part Number | FX-CH-P |
| Product | Bank Selection Unit |
| Details | PNP input |
| Product name | Bank Selection Unit FX-CH |
As of December 03, 2023
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | FX-CH-P |
| Part Number | FX-CH-P |
| Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current consumption | 25 mA or less (When all indicators light up) |
| Bank selection input | High: 4 V to +V DC (Sink current: 0.5 to 3 mA Input impedance: 10 kOhm approx.) Low: 0 to 0.6 V DC, or open |
| Power indicator | Green LED (Lights up when the power is ON) |
| Transmission operation indicator | Green LED (Lights up when loaded, blinks to lights up when saved) |
| Ambient temperature | -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Material | Enclosure: Heat-resistant ABS |
| Connection method | Connector (Note) The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft) |
| Cable length | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
| Weight | Net weight: 20 g approx. Gross weight: 25 g approx. |
| Accessory | SL-CP1 (4-pin type snap male connector): 1 pc. |
Accessories (Option)
|
| Product Number | CN-73-C1 |
| Part Number | CN-73-C1 |
| Product | Quick-connection cables |
| Details | Main cable(3-core) |
| Product name | Cable |
|
| Product Number | CN-73-C2 |
| Part Number | CN-73-C2 |
| Product | Quick-connection cables |
| Details | Main cable(3-core) |
| Product name | Cable |
|
| Product Number | CN-73-C5 |
| Part Number | CN-73-C5 |
| Product | Quick-connection cables |
| Details | Main cable(3-core) |
| Product name | Cable |
Applicable Products
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
