Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Measurement Sensors
> Measurement Sensors
> Ultra-compact Laser Collimated Beam Sensor HL-T1
> Part Number
> HL-T1010A
HL-T1010A | Ultra-compact Laser Collimated Beam Sensor HL-T1
|
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Product Number | HL-T1010A |
| Part Number | HL-T1010A |
| Product | Ultra-compact Laser Collimated Beam Sensor |
| Details | Sensor head (Sensing width 10 mm 0.394 in type) |
| Product name | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
As of April 19, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
| Item | Specifications |
|---|---|
| Product Number | HL-T1010A |
| Part Number | HL-T1010A |
| Type | Sensing width 10 mm 0.394 in type |
| Applicable controller | HL-AC1, HL-AC1P |
| Sensing range | ■■【In the case of(0 to 500 mm 0 to 19.685 in)】■■ \n Sensing width: \nø1 mm ø0.039 in \n \nMin. sensing object: \nø8 micro m ø0.315 mil opaque object \n \nRepeatability (During the state in which light is half blocked): \n 4 micro m 0.157 mil (Note：In case of an average sampling rate of 64 times.) \n \nLinear output resolution: \n4 micro m 0.157 mil (Note) In case of an average sampling rate of 64 times. \n(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width. \n(Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mm ø0.039 in.) \n \n \n■■【In the case of (500 to 2,000 mm 19.685 to 78.74 in)】■■ \nSensing width: \n ø1 to ø2.5 mm ø0.039 to ø0.098 in \n \n Min. sensing object: \n ø50 micro m ø1.969 mil opaque object Repeatability (During the state in which light is half blocked): - \n \n Linear output resolution: - \n - |
| Emission indicator | Green LED (lights up during laser emission) |
| Interference prevention function | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| Pollution degree | 3 (industrial environment) |
| Environmental resistance : Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -25 to +65 ℃ -13 to +149 ℉ |
| Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Environmental resistance : Ambient illuminance | Incandescent light: 10,000 liter x or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Environmental resistance : Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Environmental resistance : Shock resistance | 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each |
| Emitting element : IEC / JIS standards conforming type | Red semiconductor laser Class 1 (IEC / JIS / EN / GB) (modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm 0.026 mil) |
| Emitting element : FDA regulations conforming type | Red semiconductor laser Class II (FDA) (modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm 0.026 mil) (IEC / JIS / EN / GB : Class 1) |
| Material | Enclosure: Polyetherimide Case cover: Polycarbonate Front cover: Glass |
| Cable | 0.09mm2 3-core shielded cable with connector, 0.5 m 1.640 ft long |
| Cable extension | Extension up to total 10 m 32.808 ft is possible, with the optional cable. |
| Weight | Emitter: 30 g approx. Receiver: 20 g approx. |
| Accessory | MS-LA3-1 (Sensor head mounting bracket): One set of two brackets for both the emitter and the receiver CN-HLT1-1 (Sensor head to controller connection cable): 1 cable Laser beam alignment sticker: 2 pcs. Label set (FDA regulations conformed type only): 1 set |
Accessories (Option)
|
| Product Number | CN-HLT1-1 |
| Part Number | CN-HLT1-1 |
| Product name | Mating cable |
|
| Product Number | HL-AC1 |
| Part Number | HL-AC1 |
| Product | Ultra-compact Laser Collimated Beam Sensor |
| Details | Controller (NPN output) |
| Product name | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
|
| Product Number | HL-AC1P |
| Part Number | HL-AC1P |
| Product | Ultra-compact Laser Collimated Beam Sensor |
| Details | Controller (PNP output) |
| Product name | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
BY EMAIL
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
