Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Digital Mark Sensor LX-100 > Part Number > LX-101-P-Z
*Photo may vary from actual product.
Product Number | LX-101-P-Z |
Part Number | LX-101-P-Z |
Product | Digital Mark Sensor |
Details | Plug-in connector type |
Product name | Digital Mark Sensor LX-100 |
As of April 24, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Product Number | LX-101-P-Z |
Part Number | LX-101-P-Z |
Regulatory compliance | EMC Directive, RoHS Directive |
Sensing range | 10 ± 3 mm 0.394 ± 0.118 in |
Spot size | 1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance) |
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
Current consumption | Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage) |
Output 1(OUT) | PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA source current) |
Output 1:Short-circuit protection | Incorporated |
Output 1:Output operation | Mark mode: Light-ON / Dark-ON (Auto-setting on teaching) Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching) |
Output 2(OUT) | - |
Output 2:Short-circuit protection | - |
Output 2:Output operation | - |
Response time | Mark mode: 45 micro s or less Color mode: 150 micro s or less |
Teaching input | PNP non-contact input - Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open - Input impedance: 10 kOhm approx. |
Digital display | 4-digit red LED display |
Sensitivity setting | Mark mode: 2-level teaching / Full-auto teaching Color mode: 1-level teaching |
Fine sensitivity adjustment function | Incorporated |
Timer function | Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable) |
Protection | IP67 (IEC) |
Ambient temperature | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 500 Hz frequency, 3 mm double amplitude or maximum acceleration 196 m/s2 in X, Y, and Z direction for 2 hours each |
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each |
Emitting element | Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil) |
Material | Enclosure: PBT Display cover: Polycarbonate Operation buttons: Silicone rubber Lens: Glass Lens holder: Aluminum |
Cable | (Note) Mating cable is not supplied with the plug-in connector type. Please order it separately. |
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
Weight | Net weight: 55 g approx. Gross weight: 120 g approx. |
Accessory | M4 (length 30 mm 1.181 in) screw with washers: 2 pcs. |
Product Number | CN-24B-C2 |
Part Number | CN-24B-C2 |
Product name | Mating cable |
Product Number | CN-24B-C5 |
Part Number | CN-24B-C5 |
Product name | Mating cable |
Product Number | CN-24BL-C2 |
Part Number | CN-24BL-C2 |
Product name | Mating cable |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)