AUTOMATION
CONTROLS

Search
Discontinued
Products



Automation Controls Datasheet

MDME152GCHM | MINAS A5 Family Servo Motor


MINAS A5 Family Servo Motor

*Photo may vary from actual product.

  • RoHS Compliant

  • Discontinued
  • Last time buyJuly 31, 2022
Part Number MDME152GCHM Special Order Product
Product Servo Motor
Details Middle inertia, Connector type, IP65
Product name MINAS A5 Family Servo Motor
Features 10 W to 7.5 kW, Input power supply for Driver: Voltage DC 24 V/48 V・AC 100 V/200 V/400 V, 20 bit incremental・17 bit Absolute/Incremental encoder, Frequency response 2.3 kHz
  • Substitute MINAS A6 Family Servo Motor
  • Sub Prod No. -
  • Sub Part No. -
  • Remark Suggested alternative products may be different under the conditions of use.
    Please consider alternative products by checking the specifications, external shape etc,.
    Please inquire to your supplier.

Spec Detail As of July 31, 2022

Item Specifications
Part Number MDME152GCHM
Details Middle inertia, Connector type, IP65
Family Name MINAS A5
Series MDME Series
Type Middle inertia
Special Order Product Special Order Product
Cautions for Special ordering product Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan.
Protection class IP65
About Enclosure Except rotating portion of output shaft and connecting pin part of the motor connector and the encoder connector.
Environmental Conditions For more details, please refer to the instruction manual.
Flange sq. dimension 130 mm sq.
Flange sq. dimension (Unit:mm) 130
Motor lead-out configuration Connector
Motor encoder connector Connector
Power supply capacity (kVA) 2.3
Voltage specifications (V) 200
Rated output (W) 1500
Rated current (A (rms)) 9.4
Holding brake with
Mass (kg) 8.2
Oil seal with
Shaft Key-way
Rated torque (N ⋅ m) 7.16
Momentary Max. peak torque (N ⋅ m) 21.5
Max. current (A (o-p)) 40
Regenerative brake frequency (times/min) Without option :No limit
With option :No limit
Option (External regenerative resistor) Part No. : DV0P4284
About regenerative brake frequency Please refer to the details of [Motor Specification Description] , Note: 1, and 2.
Rated rotational speed (r/min) 2000
Rated rotational Max. speed (r/min) 3000
Moment of inertia of rotor ( x10-4 kg ⋅ m²) 7.99
Recommended moment of inertia ratio of the load and the rotor 10 times or less
About recommended moment of inertia ratio of the load and the rotor Please refer to the details of [Motor Specification Description] ,Note: 3.
Rotary encoder: specifications 20-bit Incremental system
Rotary encoder: Resolution 1048576

Brake specifications

Item Specifications
Static friction torque (N ⋅ m) 13.7 or more
Engaging time (ms) 100 or less
Releasing time (ms) 50 or less
Exciting current (DC) (A) 0.79 ± 10%
Releasing voltage (DC) (V) 2 or more
Exciting voltage (DC) (V) 24 ± 2.4
About brake specifications This brake will be released when it is energized.
Do not use this for braking the motor in motion.
Please refer to the details of [Motor Specification Description] , "Specifications of Built-in Holding Brake" and "Notes on [Motor specification] page, Note: 4.

Permissible load

Item Specifications
During assembly: Radial load P-direction (N) 980
During assembly: Thrust load A-direction (N) 588
During assembly: Thrust load B-direction (N) 686
During operation: Radial load P-direction (N) 490
During operation: Thrust load A, B-direction (N) 196
About permissible load For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft".

Return to top

Applicable Driver

Part Number Series Type I/F Classification of type Frame Supply voltage

Discontinued

MDDHT5540
A5 series Speed, Position, Torque, Full-closed type Analog/Pulse D-Frame Single/3-phase 200 V

Discontinued

MDDHT5540E
A5E series Position control type Pulse train only D-Frame Single/3-phase 200 V

Discontinued

MDDHT5540N21
A5ⅡN series RTEX, Ultra high-speed Network RTEX D-Frame Single/3-phase 200 V

Discontinued

MDDHT5540ND1
A5ⅡN series RTEX, Ultra high-speed Network RTEX D-Frame Single/3-phase 200 V

Discontinued

MDDKT5540
A5Ⅱ series Speed, Position, Torque, Full-closed type Analog/Pulse D-Frame Single/3-phase 200 V

Discontinued

MDDKT5540E
A5ⅡE series Position control type Pulse train only D-Frame Single/3-phase 200 V

Return to top

[Unit:mm]

Dimensions


* The external dimension is common between With or Without the brake.


Return to top

Torque charactristics


Dotted line represents the torque at 10 % less supply voltage.


Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)


Before Purchasing and Using the Products (Motors for FA & Industrial Application)

Specifications and design of the products displayed on this website are subject to change without notice for the product improvement. (including specification change, manufacturing location change, End Of Sales, End Of Life). Therefore, be sure to request and confirm in advance the most current specifications, which explain the specifications in detail, before the final stage of your design, purchasing or use for any application.

Safety Precautions

• Important Notes on exporting this product or equipment containing this product;
If the end-user or application of this product is related to military affairs or weapons, its export may be controlled by “Foreign Exchange and Foreign Trade Control Law” of Japan where export license will be required before product can be exported from Japan.

• This product is designed and manufactured for use in General Purpose Industrial Equipment and it is not intended to be used in equipment or system that may cause personal injury or death.

• All servicing such as installation, wiring, operation, maintenance and etc., should be performed by qualified personnel only.

• Tighten mounting screws with an adequate torque by taking into consideration strength of the screws and the characteristics of material to which the product will be mounted. Over tightening can damage the screw and/or material; under tightening can result in loosening.
*Example: apply 2.7 N·m – 3.3 N·m torque when tightening steel screw (M5) to steel surface.

• Install safety equipment to prevent serious accidents or loss that is expected in case of failure of this product.

• Consult us before using this product under such special conditions and environments as nuclear energy control, aerospace, transportation, medical equipment, various safety equipments or equipments which require a lesser air contamination.

• We have been making the best effort to ensure the highest quality of our products, however, some applications with exceptionally large external noise disturbance and static electricity, or failure in input power, wiring and components may result in unexpected action. It is highly recommended that you make a fail-safe design and secure the safety in the operative range.

• If the motor shaft is not electrically grounded, it may cause an electrolytic corrosion to the bearing, depending on the condition of the machine and its mounting environment, and may result in the bearing noise. Checking and verification by customer is required.

• Failure of this product depending on its content may generate smoke of about one cigarette. Take this into consideration when the application of the machine is clean room related.

• Please be careful when using the product in an environment with high concentrations of sulfur or sulfuric gases, as sulfuration can lead to disconnection from the chip resistor or a poor contact connection.

• Do not input a supply voltage which significantly exceeds the rated range to the power supply of this product. Failure to heed this caution may lead to damage of the internal parts, causing smoke and/or fire and other troubles.

• The user is responsible for matching between machine and components in terms of configuration, dimensions, life expectancy, characteristics, when installing the machine or changing specification of the machine. The user is also responsible for complying with applicable laws and regulations.

• Manufacturer’s warranty will be invalid if the product has been used outside its stated specifications.

• Component parts are subject to minor change to improve performance.

• Read and observe the instruction manual to ensure correct use of the product.

Warranty period

The warranty period is one year from the date of purchase or 18 months from the month of manufacture in our plant.

  

Warranty information

•Should any defect develop during warranty period under standard service conditions as described in the manual, the company agrees to make repairs free of charge.
Even during warranty period, the company makes fee-based repair on product containing:


[1] Failure or damage due to misuse, improper repair or alteration.
[2] Failure or damage due to falling, or damage during transportation, after the original delivery
[3] Defects resulting from neglect of the specification in use of the product.
[4] Failure or damage due to unregulated voltage and fire, and act of natural disasters such as earthquake, lightning, wind, flood and salt pollution.
[5] Defects resulting from invasion of foreign materials such as water, oil and metal pieces. Parts exceeding their standard lifetime specified in this document are excluded.
  

•The company shall not be liable for any indirect, incidental or consequential damage or loss of any nature that may arise in connection with the product

 
MDME152GCHM | MINAS A5 Family Servo Motor