[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.

Search
Discontinued
Products


NA2-N12 | General Purpose & Slim Body Area Sensor NA2-N


General Purpose & Slim Body Area Sensor NA2-N

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


Product Number NA2-N12
Part Number NA2-N12
Product General Purpose & Slim Body Area Sensor
Details NPN output
Product name General Purpose & Slim Body Area Sensor NA2-N

As of July 23, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number NA2-N12
Part Number NA2-N12
Sensing height 220 mm 8.661 in
Sensing range 5 m 16.404 ft
Beam pitch 20 mm 0.787 in
Sensing object dia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects)
Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumption:Emitter:Job indicator ON 0.8 W or less
Power consumption:Emitter:Job indicator OFF 0.7 W or less
Power consumption:Receiver:Job indicator ON 0.8 W or less
Power consumption:Receiver:Job indicator OFF 0.7 W or less
Output NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization category DC-12 or DC-13
Output:Output operation ON when all beam channels are received (OFF when one or more beam channels are interrupted)
Output:Short-circuit protection Incorporated
Response time 10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:Emitter Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:Receiver Operation indicator: Red LED (lights up when one or more beam channels are interrupted)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
* When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Interference prevention function Incorporated
Test input (emission halt) function Incorporated
Pollution degree 3 (Industrial environment)
Protection IP40(IEC)
Ambient temperature -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element Infrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note:Peak emission wavelength has been changed from production in March, 2017.)
Material Enclosure: Heat-resistant ABS
Lens cover: Polyester
Indicator cover: Acrylic
Cable 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long
Cable extension Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable.
Weight(Total weight of emitter and receiver) Net weight: 400 g approx.
Gross weight: 600 g approx.

Return to top

Accessories (Option)

no_image
Product Number MS-NA1-1
Part Number MS-NA1-1
Product name Mounting bracket
no_image
Product Number MS-NA2-1
Part Number MS-NA2-1
Product name Mounting bracket
no_image
Product Number MS-NA3-N12
Part Number MS-NA3-N12
Product name Sensor supporting bracket


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)