Business
> Industrial Devices
> Automation Controls Top
> RX-RVM5-C5
RX-RVM5-C5 | Robust Photoelectric Sensor RX(Discontinued)
|
*Photo may vary from actual product.
- Discontinued
September 30, 2022
| Product Number | RX-RVM5-C5 |
| Part Number | RX-RVM5-C5 |
| Product | Robust Photoelectric Sensor |
| Details | Standard type Retroreflective [Infrared(Long sensing range)] |
| Product name | Robust Photoelectric Sensor RX(Discontinued) |
-
-
-
-
Sorry, no suggested alternative products.
Spec Detail As of September 30, 2022
| Item | Specifications |
|---|---|
| Product Number | RX-RVM5-C5 |
| Part Number | RX-RVM5-C5 |
| Regulatory compliance | EMC Directive, RoHS Directive |
| Sensing range | 0.1 to 5 m 0.328 to 16.404 ft (Note) The sensing range and the sensing object for the retroreflective type sensor are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. |
| Sensing object | dia. 50 mm dia. 1.969 in or more opaque, or translucent object (Note) The sensing range and the sensing object for the retroreflective type sensor are specified for the RF-230 reflector. Further, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.1 m 0.328 ft away. (Note) Make sure to confirm detection with an actual sensor before use. |
| Hysteresis | - |
| Repeatability(perpendicular to sensing axis) | 1 mm 0.039 in or less |
| Supply voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Current consumption | 40 mA or less |
| Sensing output | NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between sensing output and 0 V) - Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) |
| Sensing output:Utilization category | DC-12 or DC-13 |
| Sensing output:Output operation | Switchable either Light-ON or Dark-ON |
| Sensing output:Short-circuit protection | Incorporated |
| Self-diagnosis output | NPN open-collector transistor - Maximum sink current: 50 mA - Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V) - Residual voltage: 1.5 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| Self-diagnosis output:Output operation | ON under unstable sensing condition |
| Self-diagnosis output:Short-circuit protection | - |
| Response time | 1 ms or less |
| Test input (emission halt) function | Incorporated |
| Operation indicator | Red LED (lights up when the sensing output is ON) |
| Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
| Emitting indicator | - |
| Sensitivity adjuster | Continuously variable adjuster |
| Automatic Interference prevention function | Incorporated (Two units of sensors can be mounted close together.) |
| Protection | IP67 (IEC) |
| Ambient temperature | -25 to +60 degrees -13 to +140 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Ambient illuminance | Incandescent light: 3,500 Lx or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Emitting element (modulated) | Infrared LED |
| Emitting element (modulated):Peak emission wavelength | 880 nm 0.035 mil |
| Material | Enclosure: Die-cast zinc alloy Indicator cover: Polyethersulphone Lens: Acrylic |
| Cable | 0.15 mm2 5-core oil, heat and cold resistant cabtyre cable, 5 m 16.404 ft long |
| Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable |
| Accessory | MS-RX-1 (Sensor mounting bracket): 1 set RF-230 (Reflector): 1 pc Adjusting screwdriver: 1 pc |
Accessories (Option) As of September 30, 2022
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT US
BY EMAIL
BY EMAIL
Please click your area to select country or region
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
