Business
> Industrial Devices
> Automation Controls Top
> SD3-A1
SD3-A1 | Safety Laser Scanner Type 3 SD3-A1(Discontinued)
|
*Photo may vary from actual product.
- Discontinued
March 31, 2020
| Product Number | SD3-A1 |
| Part Number | SD3-A1 |
| Product | Safety Laser Scanner Type 3 |
| Product name | Safety Laser Scanner Type 3 SD3-A1(Discontinued) |
-
-
-
-
Sorry, no suggested alternative products.
Spec Detail As of March 31, 2020
| Item | Specifications |
|---|---|
| Product Number | SD3-A1 |
| Part Number | SD3-A1 |
| Applicable standards:International standard | IEC 61496-1/3 (Type 3), ISO 13849-1 (Category 3, PLd), IEC 61508-1 to 7 (SIL2), IEC 62061 (SIL2) |
| Applicable standards:Japan | JIS B 9704-1/3 (Type 3), JIS B 9705-1 (Category 3), JIS C 0508 (SIL2) |
| Applicable standards:Europe | EN 61496-1 (Type 3), ISO 13849-1 (Category 3, PLd), EN 61508-1 to 7 (SIL2) |
| dummy | dia. 150 mm dia. 5.906 in/0 to 4.0 m 0 to 13.123 ft dia. 70 mm dia. 2.756 in/0 to 4.0 m 0 to 13.123 ft dia. 50 mm dia. 1.969 in/0 to 2.8 m 0 to 9.186 ft dia. 40 mm dia. 1.575 in/0 to 2.2 m 0 to 7.218 ft dia. 30 mm dia. 1.181 in/0 to 1.6 m 0 to 5.249 ft |
| dummy | When dust suppression function is not selected: 83 mm 3.268 in When dust suppression function is selected: 83 mm 3.268 in for less than 3.5 mm 0.138 in, and 100 mm 3.937 in for 3.5 mm 0.138 in or more (automatically calculated using the included software) |
| dummy | Minimum 1.8 % |
| dummy | dia. 150 mm dia. 5.906 in (fixed) |
| dummy | 0 to 15 m 0 to 49.213 ft |
| dummy | Minimum 20 % |
| dummy | 50 m 164.042 ft (fixed) |
| dummy | 190degrees / 180degrees (by setting) |
| dummy | Max. 7 + 1 (without detection zone) [Zone pairs in combination of detection zone and warning zone can be switched over by external input] |
| dummy | 200mm 7.874 in |
| dummy | 24 V DC+20-30 % (IEC 60742) |
| Current consumption | 300mA approx. (excluding external connection load) |
| Fuse rating | 1.25 A semi-time-lag fuse |
| Control outputs (OSSD 1, OSSD 2) | PNP open-collector transistor 2 outputs - Rated operating voltage: supply voltage (UB) - 3.2 V - Max. source current: 250 mA - Residual voltage: 3.2 V or less |
| Control outputs (OSSD 1, OSSD 2):Operation mode | When no object enters into the detection zone: ON When an object enters: OFF |
| Control output(OSSD 1, OSSD 2):Response time | Min. 80 ms (2 scans) to max. 640 ms (16 scans) switching method |
| Control outputs (OSSD 1, OSSD 2):Protection circuit | Incorporated |
| dummy | PNP open-collector transistor - Rated operating voltage: supply voltage (UB) - 4 V - Max. source current: 100 mA - Residual voltage: 4 V or less |
| dummy | Switching method of operation mode (set by below) - Not used - Main unit at normal operation: ON, Abnormal operation: OFF - When no object enters into the warning zone: ON, When an object enters: OFF - Main unit at normal operation: ON, Abnormal operation: OFF and When no object enters into the warning zone: ON, When an object enters: OFF |
| dummy | Min. 80 ms (2 scans) to max. 640 ms (16 scans) switching method |
| dummy | PNP open-collector transistor - Rated operating voltage: supply voltage (UB) - 4 V - Max. source current: 100 mA - Residual voltage: 4 V or less |
| dummy | Main unit at normal operation: ON Abnormal operation: OFF |
| dummy | Class 1 [IEC 60825, FDA (Note) ] (Note) In accordance Laser Warning 50 (2007.6.24), based on FDA regulations (21 CFR 1040.10, 1040.11). |
| dummy | 905 nm 0.036 mil |
| Environmental resistance:Degree of protection | IP65 |
| Environmental resistance:Ambient temperature | 0 to +50degrees +32 to +122 degrees Fahrenheit , Storage: -20 to +60degrees -4 to +140 degrees Fahrenheit |
| Environmental resistance:Ambient humidity | Operation and storage: Max. 95 % RH (No dew condensation) |
| dummy | 10 to 150 Hz frequency, 5 G max. (50 m/s2 approx.) in X, Y and Z directions for twenty times each |
| Maximum cable length | 15-pin plug: Max. 50 m 164.042 ft 9-pin plug: Max. 10 m 32.808 ft (when using RS-232C) / Max. 50 m 164.042 ft (when using RS-422) (by using optional connection cable) (Note) (Note) Be careful that a voltage drop may occur depending on the cable length or cable's conductor cross-section area. |
| Material | Main body: Die-cast aluminum Scanner window: Thermoplastic resin |
| Accessories | SD3-PS (exclusive 15-pin connector): 1 pc SD3-RS232 (exclusive 9-pin connector): 1 pc Mounting screws [M5 (length 20 mm 0.787 in) hexagon-socket-head bolt: 2 pcs M5 (length 16 mm 0.630 in) hexagon-socket-head bolt: 2 pcs., attached to SD3-PS]: 1 set Simplified instruction manual: 1 copy Installation CD-ROM (includes detailed instruction manual data): 1 CD |
| Weight | Net weight: 2.1 kg approx Gross weight: 2.9 kg approx |
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT US
BY EMAIL
BY EMAIL
Please click your area to select country or region
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
