Business > Industrial Devices > Automation Controls Top > SF4-AH72

SF4-AH72 | Small Light Curtain Type 4 SF4-AH(Discontinued)

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

Discontinued
September 30, 2013

Product Number	SF4-AH72
Part Number	SF4-AH72
Product	Small Light Curtain [Type 4]
Details	PNP output equivalent type
Product name	Small Light Curtain Type 4 SF4-AH(Discontinued)

Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D
SF4D-H72
SF4D-H72
Specifications are different such as detection width (protective height), mounting hole position, wiring, etc.
If you use a compatible cable, the conventional connector cable can be used as is.
NPN/PNP shared (can be switched by wiring).
Please contact us for details.

Spec Detail As of September 30, 2013

Item	Specifications
Product Number	SF4-AH72
Part Number	SF4-AH72
No. of beam channels	72
Beam pitch	20 mm 0.787 in
Protective height	1,470 mm 57.874 in
Current consumption	Emitter: 130 mA or less Receiver: 125 mA or less
Weight(Total of emitter and receiver)	2,100 g approx.
Applicable standards	EN 954-1 (Category 4), EN 61496-1 (Type 4), IEC 61496-1/2 (Type 4), UL 61496-1/2 (Type 4), UL 1998
Operating range	0.3 to 7 m 0.984 to 22.966 ft
Min. sensing object	dia. 30 mm dia. 1.181 in opaque object (Note) In this light curtain, the floating blanking function can be set by using the Handy-controller (SF-HC)(optional). When the floating blanking function is used, the size of the min. sensing object is changed. For details on the floating blanking function, refer to SF4B Ver.2 series.
Effective aperture angle	plus or minus 2.5degrees or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)]
Power voltage	24 V DC plus or minus 10 % Ripple P-P 10 % or less
Control outputs (OSSD 1, OSSD 2)	Semiconductor output (PNP output equivalent) 2 outputs - Maximum source current: 200 mA - Applied voltage: Same as supply voltage (between control output and +V) - Residual voltage: 2.5 V or less (at 200 mA source current)
Control outputs (OSSD 1, OSSD 2):Operation mode	ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the light curtain or the synchronization signal)
Response time	In normal operation: OFF response 11 ms or less, ON response 70 ms or less In the blanking function set condition: OFF response 15 ms or less, ON response 70 ms or less
Response time:Series connection	In normal operation: OFF response 20 ms or less, ON response 70 ms or less In the blanking function set condition: OFF response 20 ms or less, ON response 70 ms or less
Auxiliary output (Non-safety output)	PNP open-collector transistor - Maximum source current: 60 mA - Applied voltage: Same as supply voltage (between auxiliary output and +V) - Residual voltage: 2.5 V or less (at 60 mA source current)
Auxiliary output (Non-safety output):Operation mode	OFF when control outputs are ON, ON when control outputs are OFF (It is possible to use the handy-controller to switch the mode to ON when control outputs are ON and OFF when control outputs are OFF.)
Interference prevention function	Incorporated (In cace of series connection: 3 sets max., Max. beam channels 192 beam channels)
Emission halt function	Incorporated
Test input (emission halt input)	Emission: +9 V to Vs (sink current: 2 mA or less) (Note) Emission halt: Open, or 0 to +1.5 V (Note) Vs is the same value as the voltage of the power supply to be used.
Environmental resistance:Degree of protection	IP65 (IEC)
Environmental resistance:Ambient temperature	- 10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: - 25 to +70 degrees - 13 to +158 degrees Fahrenheit
Emitting element	Infrared LED (Peak emission wavelength: 870 nm 0.034 mil)
Material	Enclosure: Aluminium Front case: Polycarbonate Lens: Polycarbonate Cap: Polycarbonate and ABS
Accessories	MS-SF2N-1 (Rear sensor mounting bracket): 1 set for emitter and receiver MS-SF2N-2 (U-shaped rear mounting intermediate supporting bracket): 3 set MS-SF2N-L (L-shaped intermediate supporting bracket): 3 set SF4-AH-TR (Test rod): 1 pc.

Return to top

Accessories (Option) As of September 30, 2013

Exclusive Control Unit for Safety Light Curtain SF-C10

Product Number	SF-C13
Part Number	SF-C13
Product	Exclusive Control Unit for Safety Light Curtain
Details	Slim type control unit
Product name	Exclusive Control Unit for Safety Light Curtain SF-C10