Business > Industrial Devices > Automation Controls Top > Components & Devices > Connectors > Automotive Connectors > CW1 > Rating/Performance
For Automotive Application with 125°C heat resistance 3.4mm low profile design.
|
Item | Specifications | Conditions | |
---|---|---|---|
Electrical characteristics |
Rated current | Each pin: 3.0 A | Maximum current can be applied to one contact. (Except for the capacity of wire.) |
Rated voltage | 50 V DC | ||
Dielectric strength | 1,000 V AC for 1 min | Detection current: 1 mA (No short or damage) | |
Insulation resistance | Min. 100 MΩ | Using 500 V DC megger (1 min) | |
Contact resistance | Max. 10 mΩ (Initial) Max. 20 mΩ (after test) |
Except wire conductor resistance. Measured at DC 10 mA |
|
Mechanical characteristics |
Insertion force | Max. 13.0 N (Initial stage・2 pins) Max. 18.0 N (Initial stage・4 pins) Max. 23.0 N (Initial stage・6 pins) Max. 28.0 N (Initial stage・8 pins) |
|
Removal force | Max. 13.0 N (Initial stage・2 pins) Max. 18.0 N (Initial stage・4 pins) Max. 23.0 N (Initial stage・6 pins) Max. 28.0 N (Initial stage・8 pins) |
Measured by removal of housing lock. | |
Housing lock force | Min. 30 N (Initial stage) | ||
Environmental characteristics |
Temperature and humidity of ambient, storage and transportation | –40 to +125°C (Including temperature rise when applying current) (Storage and transportation temperature is –40 to +50°C in a packing state.)*1 |
No icing. No condensation |
Soldering heat resistance | The initial specification must be satisfied electrically and mechanically | Max. peak temperature of 260°C Reflow soldering: Max. 2 times (PC board surface temperature near the receptacle) Soldering iron: 300°C within 5 sec., 350°C within 3 sec. |
|
Thermal shock resistance (Receptacle and plug mated) | After 500 cycles Contact resistance: Max. 20 mΩ |
*Vapor phase |
|
Humidity resistance (Receptacle and plug mated) |
After 96 hours Contact resistance: Max. 20 mΩ Insulation resistance: Min. 100 MΩ |
Bath temperature 60 ±2°C Humidity 90 % RH |
|
Heat resistance (Receptacle and plug mated) | After 120 hours Contact resistance: Max. 20 mΩ |
Bath temperature 125 ±2°C | |
Vibration resistance (Receptacle and plug mated) |
Current shut off should not exceed 1 µs during vibration test. (Contact resistance: Max. 20 mΩ) |
Acceleration: 44.0 m/s² |
|
Shock resistance (Receptacle and plug mated) |
Current shut off should not exceed 1 µs during shock test. |
Acceleration: 981 m/s² Operation time: 6 ms Testing tool: Refer to Fig.1 *2 Direction: 6 direction (±X, ±Y, ±Z) (Different samples are used for each direction.) Number: 3 times Detection current: 10 mA |
|
Lifetime characteristics |
Insertion and removal life | 30 times (Contact resistance: Max. 20 mΩ) | Speed: 25 mm/min |
Solder paste thickness | The initial specification must be satisfied electrically and mechanically | Recommendation t=0.15 mm |
*1. As the humidity range differs depending on the ambient temperature, the humidity range indicated below should be used. This temperature and humidity range does not guarantee permanent performance. |
*2. Fig. 1 |
Receptacle
Name | Material | Color | Surface treatment |
---|---|---|---|
Body | LCP (UL94 V-0) | Black | - |
Post | Copper Alloy | - | Contact portion: PdNi + Au flash plating over nickel Soldering portion: Sn plating over nickel |
Metal tab | Copper Alloy | - | Soldering portion: Sn plating over nickel |
Housing
Name | Material | Color | Surface treatment |
---|---|---|---|
Housing | PBT (UL94 HB) | Black | - |
Contact
Name | Material | Color | Plating |
---|---|---|---|
Contact | Copper alloy | - | Contact portion: PdNi + Au flash plating over nickel Barrel portion: Sn plating over nickel |
Wire range | Wire specifications | ||
---|---|---|---|
Number of strands/Strand diameter(pcs/mm) | Conductor sectional area(mm²) | Insulation diameter(mm) | |
AWG #24 | 11/0.16 | 0.2210 | φ1.22 to φ1.52 |
AWG #22 | 17/0.16 | 0.3416 | |
AVSS0.3 | 7/0.26 | 0.3715 | |
Tinned annealed copper wire Furukawa Electric Co., Ltd. BEAMEX ER500 |
12/0.18 | 0.3 | φ1.52 |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)