AUTOMATION
CONTROLS

Search
Discontinued
Products



P4S Shield type(0.4mm pitch)

Radiation noise reduced by multi-point ground and shield construction

Features

  • Radiation noise is reduced thanks to better grounding with multi-point ground construction and covering using a shield plate

  • “TOUGH CONTACT” construction provides high resistance to various environmental.

  • Previous standard product (P4S) can also be used on the header side.

  • Freedom of design is increased, because it has the same foot pattern as the previous standard product (P4S).

Applications

  • Note PCs and other mobile devices

 

Characteristics

Item Specifications Conditions
Electrical
characteristics
Rated current 0.3 A/pin contact (Max. 5 A at total pin contacts)
Rated voltage 60 V AC/DC
Dielectric strength 150 V AC for 1 min No short-circuiting or damage at a detection current of 1 mA when the specified voltage is applied for one minute.
Insulation resistance Min. 1,000 MΩ (Initial stage) Using 250 V DC megger (applied for 1 min)
Contact resistance Max. 90 mΩ According to the contact resistance measurement method of JIS C 5402.
Mechanical
characteristics
Composite insertion force Max. 0.981 N/pin contact x pin contacts (Initial stage)  
Composite removal force Min. 0.0588 N/pin contact x pin contacts  
Environmental
characteristics
Ambient temperature -55 to +85°C No icing. No condensation.
Soldering heat resistance The initial specification must be satisfied electrically and mechanically. Reflow soldering:
Peak temperature: 260°C or less
(on the surface of the PC board around the connector terminals)
Soldering iron: 300°C within 5 sec. 350°C within 3 sec.
Storage temperature -55 to +85°C (Products only)
-40 to +50°C (emboss packing)
No icing. No condensation.
Thermal shock resistance
(Header and socket mated)
5 cycles
insulation resistance: Min. 100 MΩ,
contact resistance: Max. 90 mΩ
Conformed to MIL-STD-202F, method 107 G
Humidity resistance
(Header and socket mated)
120 hours
insulation resistance: Min. 100 MΩ,
contact resistance: Max. 90 mΩ
Conformed to IEC60068-2-78
Temperature 40±2°C, humidity 90 to 95% RH
Salt water spray resistance
(Header and socket mated)
24 hours
insulation resistance: Min. 100 MΩ,
contact resistance: Max. 90 mΩ
Conformed to IEC60068-2-11
Temperature 35±2°C, salt water concentration 5±1%
H2S resistance
(Header and socket mated)
48 hours
contact resistance: Max. 90 mΩ
Temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% RH
Lifetime
characteristics
Insertion and removal life 50 times Repeated insertion and removal speed of max. 200 times/hours
Unit weight 38 pins: Socket 0.07 g, Header 0.03 g
50 pins: Socket 0.09 g, Header 0.04 g
74 pins: Socket 0.12 g, Header 0.05 g

Return to top

Material and surface treatment

Part name Material Surface treatment
Molded portion LCP resin (UL94V-0)
Contact and Post Copper alloy Contact portion: Base: Ni plating, Surface: Au plating
Terminal portion: Base: Ni plating, Surface: Au plating (except the terminal tips)
The socket terminals close to the portion to be soldered have nickel barriers (exposed nickel portions).
Shield plate Copper alloy Contact portion: Base: Ni plating, Surface: Au plating
Terminal portion: Base: Ni plating, Surface: Au plating
Soldering terminals Copper alloy Sockets:
 Base: Ni plating, Surface: Pd + Au flash plating (except the terminal tips)
Headers:
 Base: Ni plating, Surface: Au plating (except the terminal tips)

Return to top

Related Information

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)