Business
> Industrial Devices
> Automation Controls Top
> Components & Devices
> Relays / Couplers
> PhotoMOS
> PhotoMOS Lineup
> PhotoMOS RF SOP 2 Form A Low C×R
> Rating/Performance
|
Item | Symbol | AQW223R2S | Remarks | |
---|---|---|---|---|
Input | LED forward current | IF | 50 mA | |
LED reverse voltage | VR | 5 V | ||
Peak forward current | IFP | 1 A | f=100Hz, Duty Ratio=0.1% | |
Power dissipation | Pin | 75 mW | ||
Output | Load voltage (peak AC) | VL | 250 V | |
Continuous load current | IL | 0.14 A (0.17 A) | Peak AC, DC ( ): in case of using only 1 channel |
|
Peak load current | Ipeak | 0.42 A | 100 ms (1 shot), VL = DC | |
Power dissipation | Pout | 600 mW | ||
Total power dissipation | PT | 650 mW | ||
I/O isolation voltage | Viso | 1,500 Vrms | ||
Ambient temperature (Operating) | Topr | -40 to +85°C | (Avoid icing and condensation) | |
Ambient temperature (Storage) | Tstg | -40 to +100°C | ||
Junction temperature | Tj | 125°C |
Item | Symbol | AQW223R2S | Condition | ||
---|---|---|---|---|---|
Input | LED operate current |
Typical | IFon | 0.5 mA | IL = Max. |
Maximum | 3.0 mA | ||||
LED turn off current |
Minimum | IFoff | 0.1 mA | ||
Typical | 0.45 mA | ||||
LED dropout voltage |
Typical | VF | 1.32 V (1.14 V at IF = 5 mA) | IF = 50 mA | |
Maximum | 1.5 V | ||||
Output | On resistance | Typical | Ron | 11 Ω | IF = 5 mA IL = Max. |
Maximum | 15 Ω | ||||
Output capacitance |
Typical | Cout | 33 pF | f = 1 MHz VB = 0 V |
|
Maximum | 40 pF | ||||
Off state leakage current |
Typical | ILeak | 0.03 nA | IF = 0 mA IL = Max. |
|
Maximum | 10 nA*1 | ||||
Transfer characteristics | Turn on time*2 | Typical | Ton | 0.15 ms | IF = 5 mA IL = Max. |
Maximum | 0.5 ms | ||||
Turn off time*2 | Typical | Toff | 0.05 ms | IL = Max. |
|
Maximum | 0.2 ms | ||||
I/O capacitance | Typical | Ciso | 0.8 pF | f = 1 MHz VB = 0 V |
|
Maximum | 1.5 pF | ||||
Initial I/O isolation resistance |
Minimum | Riso | 1,000 MΩ | 500 V DC |
*1.Available as custom orders (1 nA or less) |
*2.Turn on/Turn off time |
|
Please use under recommended operating conditions to obtain expected characteristics.
Item | Symbol | Number of used channels |
Min. | Max. | Unit | |
---|---|---|---|---|---|---|
LED current | IF | - | 5 | 30 | mA | |
AQW223R2S | Load voltage (Peak AC) | VL | - | - | 125 | V |
Continuous load current | IL | 1 ch 2 ch |
- | 0.17 0.14 |
A |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)