AV6 (CS) Switches
Contact rating
Contact |
Contact voltage |
Resistive load (cos φ ≒ 1) |
Au-clad double layer contact |
30V DC |
0.1A |
5V DC |
1mA Low-level circuit rating |
Return to top
Characteristics
Item |
Specifications |
Expected life |
Mechanical (OT max.) |
Min. 5 × 105(at 60 cpm) |
Electrical (Rated load OT max.) |
Min. 2 × 105(at 20 cpm) |
Insulation resistance |
Min. 100MΩ |
Dielectric strength |
Between non-continuous terminals |
1,000 Vrms for 1 min. |
Between terminals and other exposed metal parts |
1,500 Vrms for 1 min. |
Between each terminal and ground |
1,500 Vrms for 1 min. |
Contact resistance (initial) |
100MΩ max. (by voltage drop 0.1A 6 to 8 VDC)
Value includes the resistance between the connector and the lead (#AWG28, length: 50 mm) |
Viblation resistance (malfunction vibration resistance) |
10 to 55 Hz at amplitude of 0.75mm (Contact opening: max. 1msec.) |
Shock resistance (malfunction shock resistance) |
Applied shock 1.50N type: Min.300m/s2{Contact opening: Max. 1msec.} 0.50N type: Min.150m/s2{Contact opening: Max. 1msec.} |
Connector insertion force |
Max. 20N (inserted in removal direction) |
Connector holding force |
Min. 20N (extracted by static load, in removal direction) |
Connector removal operating times |
Max. 5 times (in removal direction) |
Allowable operating speed (No load) |
0.1 to 1,000 mm/s (at pin plunger) |
Max. operating cycle rate (No load) |
300 cpm |
Ambient temperature |
-25 to +85°C (No freezing and condensing) |
Unit weight |
Approx. 2.5g (pin plunger type) |
Contact specifications |
Contact material |
CuNi alloy + Au-clad |
Protection grade |
IP40 |
Return to top
Operating characteristics
Lever position: Standard
Actuator |
Operating Force (OF) Max. |
Release Force (RF) Min. |
Pretravel (PT) Max. |
Movement Differential (MD) Max. |
Overtravel (OT) Min. |
Operating Position (OP) |
Pin plunger |
0.50N |
0.04N |
0.6mm |
0.1mm |
0.4mm |
8.4±0.3mm |
1.50N |
0.25N |
Hinge lever |
0.20N |
0.02N |
2.6mm |
0.8mm |
1.2mm |
10.0±0.8mm |
0.50N |
0.06N |
Simulated roller lever |
0.20N |
0.02N |
2.6mm |
0.8mm |
1.2mm |
12.2±0.8mm |
0.50N |
0.06N |
Roller lever |
0.20N |
0.02N |
2.6mm |
0.8mm |
1.2mm |
15.7±0.8mm |
0.50N |
0.06N |
Lever position: Backward
Actuator |
Operating Force (OF) Max. |
Release Force (RF) Min. |
Pretravel (PT) Max. |
Movement Differential (MD) Max. |
Overtravel (OT) Min. |
Operating Position (OP) |
Hinge lever |
0.35N |
0.03N |
1.4mm |
0.6mm |
0.7mm |
9.2±0.6mm |
1.00N |
0.10N |
Simulated roller lever |
0.35N |
0.03N |
1.4mm |
0.6mm |
0.7mm |
11.3±0.6mm |
1.00N |
0.10N |
Roller lever |
0.35N |
0.03N |
1.4mm |
0.6mm |
0.7mm |
14.9±0.6mm |
1.00N |
0.10N |
Return to top
Return to top